does anyone have a drawing, or set of drawings shewing the placement of the springs'inside" the action that affect trigger weight. Have looked at the "normal" ones seen often with the parts disassembled, but not the "finished" set up, which needs a cut-away diagram to display. Have just looked a a current instruction manual which shews a trigger weight adjustment screw at the front of the bottom of the action, and on my older rifles there is such a spring, but can't work out what it does, help !!!

I have two flat spring Winchesters one in 44WCF, hex bbl, #78xxx, and the other in 38WCF, round bbl, #81xxx, as well as some newer coil spring ones in 25-20SS, hex bbl, #119xxx, 32-20 round bbl marked with Perry Bros (QLD. Winchester importer) Stinger wasp mark #112xxx another hex bbl #116xxx,  and also a custom 38-55 hex #112xxx. I seem to have "played" with the internals of all and now want to put them back to original , thanks any one for any help you can give. .All are LowWalls

. (You need to Login or Register to view media files and links)