ASSRA Forum › General › Reloading the Single Shot Rifle › Breech Seating The 45-70
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) Breech Seating The 45-70 (Read 2502 times)
Grumpy gumpy
Full Member
***
Offline



Posts: 214
Location: australia
Joined: Jul 6th, 2016
Re: Breech Seating The 45-70
Reply #15 - Oct 1st, 2022 at 2:18am
Print Post  
Haven’t put it over a crony, it shoots better than I can and that was good enough for me, I use aperture sights and can put them in the 10 ring if all goes well. It’s an original receiver that has a 32" octagonal barrel( green river?) and I made the stock and did all the other work.
Gumpy
  
Back to top
 
IP Logged
 
mtnwinds2
Participating Member
*
Offline



Posts: 10
Joined: Aug 20th, 2022
Re: Breech Seating The 45-70
Reply #16 - Oct 7th, 2022 at 6:21pm
Print Post  
Well, the 3mm cupped tip punch arrived and I completely stripped the Miroku action down.  Wayne's (TexasMac) book, which has a complete section on the disassembly/reassembly of the action, kept me out of trouble.

The 1885 Hi-Wall reproduction by Miroku is a beautiful rifle in many respects but it has a major shortcoming; it doesn't tolerate debris in the action at all.  I'll be doing my best to never, ever, let any BP dribble into that action ever again!  I've secured a Lee Factory Crimp Die to help secure the wad in the case.  Should be able to resume testing next week.
  
Back to top
 
IP Logged
 
Mick B
Frequent Elocutionist
*****
Offline



Posts: 1004
Location: 19 Ian Nicol St watson ACT aus
Joined: Apr 11th, 2013
Re: Breech Seating The 45-70
Reply #17 - Oct 8th, 2022 at 7:18pm
Print Post  
I sometimes shoot BS in my 40-65 and I find a floral foam wad in the case mouth holds the powder in perfectly and up to this day I have never had one come out. Having said that it will probably happen tomorrow.
Mike.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.6386 seconds.