ASSRA Forum › General › Reloading the Single Shot Rifle › 257325 IDEAL mold
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Hot Topic (More than 10 Replies) 257325 IDEAL mold (Read 1119 times)
moodyholler
Oldtimer
*****
Offline



Posts: 697
Location: Blue Ridge
Joined: Oct 11th, 2005
257325 IDEAL mold
Aug 9th, 2022 at 1:40pm
Print Post  
What bullet is this? Thanks moodyholler
  
Back to top
YIMAIM  
IP Logged
 
Cbashooter
Frequent Elocutionist
*****
Offline



Posts: 1572
Location: Eastern Wa.
Joined: Mar 31st, 2018
Re: 257325 IDEAL mold
Reply #1 - Aug 9th, 2022 at 4:09pm
Print Post  
I have that molded in my 25 caliber Box I could dig it up and cast samples.

It's around 115g round nose gas check
  
Back to top
 
IP Logged
 
.22-5-40
Oldtimer
*****
Offline



Posts: 797
Joined: Feb 13th, 2010
Re: 257325 IDEAL mold
Reply #2 - Aug 9th, 2022 at 4:15pm
Print Post  
Lyman Handbook of Cast Bullets pg.106:  Designed for high velocity in the .25-35 Remington Automatic.  Also in same book, pg.171, gives load data for the .25-35 Winchester using this bullet.  Have tried this bullet in a .25 Ackley Krag but so far rifle doesn't like it.                  
  
Back to top
 
IP Logged
 
moodyholler
Oldtimer
*****
Offline



Posts: 697
Location: Blue Ridge
Joined: Oct 11th, 2005
Re: 257325 IDEAL mold
Reply #3 - Aug 21st, 2022 at 7:34pm
Print Post  
I have another of these molds. Casts 120 grain bullet as stated. One without handles is much longer by 2 bands, so I guess I will have to cast some and see what they weigh. Is this a special? Thanks
  
Back to top
YIMAIM  
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11463
Location: Why, out West of course
Joined: May 29th, 2006
Re: 257325 IDEAL mold
Reply #4 - Aug 21st, 2022 at 7:47pm
Print Post  
257-325. Accurate bullet in my 25-20SS loaded fixed using half WW and half lino alloy.  Douglas barrel 10 twist
  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
Premod70
Oldtimer
*****
Offline



Posts: 864
Location: North Carolina
Joined: Jan 16th, 2016
Re: 257325 IDEAL mold
Reply #5 - Aug 21st, 2022 at 8:29pm
Print Post  
Hey Westerner, are you sure that bullet came from a Accurate mold, never seen a round nose in their catalog.
  
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Offline



Posts: 3867
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: 257325 IDEAL mold
Reply #6 - Aug 21st, 2022 at 8:39pm
Print Post  
He may have just said that the 257325 bullet is accurate in his 25-20 SS.
  
Back to top
 
IP Logged
 
Premod70
Oldtimer
*****
Offline



Posts: 864
Location: North Carolina
Joined: Jan 16th, 2016
Re: 257325 IDEAL mold
Reply #7 - Aug 21st, 2022 at 9:07pm
Print Post  
oneatatime wrote on Aug 21st, 2022 at 8:39pm:
He may have just said that the 257325 bullet is accurate in his 25-20 SS.

Thanks, plain English is not my strong point, if any.
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11463
Location: Why, out West of course
Joined: May 29th, 2006
Re: 257325 IDEAL mold
Reply #8 - Aug 21st, 2022 at 9:51pm
Print Post  
Humility, strong point!   Wink

I could have written that more better.  Embarrassed
  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
Premod70
Oldtimer
*****
Offline



Posts: 864
Location: North Carolina
Joined: Jan 16th, 2016
Re: 257325 IDEAL mold
Reply #9 - Aug 21st, 2022 at 10:00pm
Print Post  
I’m guilty as charged, came from studying Accurate’s mold catalog several hours before reading Westerner’s post. The brain could see the obvious, maybe better next time, then again maybe not!
  
Back to top
 
IP Logged
 
Cbashooter
Frequent Elocutionist
*****
Offline



Posts: 1572
Location: Eastern Wa.
Joined: Mar 31st, 2018
Re: 257325 IDEAL mold
Reply #10 - Aug 21st, 2022 at 11:03pm
Print Post  
westerner wrote on Aug 21st, 2022 at 7:47pm:
257-325. Accurate bullet in my 25-20SS loaded fixed using half WW and half lino alloy.  Douglas barrel 10 twist



with gascheck? 
I have a 44 with 1-10 Douglas. I'm curious haw fast you are driving it.
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11463
Location: Why, out West of course
Joined: May 29th, 2006
Re: 257325 IDEAL mold
Reply #11 - Aug 22nd, 2022 at 12:20am
Print Post  
I lathe bored the gas check relief out of the cavity.  
It shot well with the relief however.
I'm using 8 grains of 4227. Don't know the velocity.
  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
Cbashooter
Frequent Elocutionist
*****
Offline



Posts: 1572
Location: Eastern Wa.
Joined: Mar 31st, 2018
Re: 257325 IDEAL mold
Reply #12 - Aug 22nd, 2022 at 12:30am
Print Post  
westerner wrote on Aug 22nd, 2022 at 12:20am:
I lathe bored the gas check relief out of the cavity.  
It shot well with the relief however.
I'm using 8 grains of 4227. Don't know the velocity.


thanks.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.5614 seconds.