ASSRA Forum - Mark V Martini scope mounting info

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Mark V Martini scope mounting info

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Mark V Martini scope mounting info (Read 784 times)

mr.card1 Participating Member Offline Posts: 34 Joined: Jun 5^th, 2017	Mark V Martini scope mounting info Jul 27^th, 2022 at 11:30am	Print Post
	Looking for info on mounting a modern scope on my International. Availability of bases, etc. Any help appreciated........thanks


	IP Logged

gnoahhh Oldtimer Offline Posts: 934 Location: Gaithersburg, MD Joined: Mar 31^st, 2010	Re: Mark V Martini scope mounting info Reply #1 - Jul 27^th, 2022 at 5:04pm	Print Post
	Is the barrel drilled and tapped for target scope blocks? Mine was, so I simply screwed on a pair of blocks and am shooting the heck out of it with a Lyman STS 20x. If you are looking to mount a "modern" scope, somebody else will have to advise you.


	IP Logged

Cbashooter Frequent Elocutionist Offline Posts: 1600 Location: Eastern Wa. Joined: Mar 31^st, 2018	Re: Mark V Martini scope mounting info Reply #2 - Jul 27^th, 2022 at 7:52pm	Print Post
	you can get a EGW cantilever weaver mount that uses the two rear target mount spacing(if your rifle is tapped).It works fine. (You need to *Login* or *Register* to view media files and links)


	IP Logged

MartiniBelgian Frequent Elocutionist Offline Posts: 1714 Location: Aarschot Joined: Jun 7^th, 2004	Re: Mark V Martini scope mounting info Reply #3 - Jul 28^th, 2022 at 1:10am	Print Post
	Or there is the mount that uses the 2 rear sight mounting holes in the receiver, very easy to install. Not conventional maybe, but works very well. Do take into account when putting a rib on the barrel that the barrel is tapered. might mess up scope adjustments a bit...
	« Last Edit: Aug 1^st, 2022 at 3:52am by MartiniBelgian »

	WWW IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.5178 seconds.