ASSRA Forum - Bullet/mould advice for 32 Miller short.

ASSRA Forum › General › Reloading the Single Shot Rifle › Bullet/mould advice for 32 Miller short.

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Bullet/mould advice for 32 Miller short. (Read 784 times)

Dellet Frequent Elocutionist Offline Posts: 1090 Joined: May 19^th, 2017	Bullet/mould advice for 32 Miller short. Jul 21^st, 2022 at 10:42am	Print Post
	Looking for a recommendation for a bullet or mould. It’s a .319” groove 1/15 twist, breech seated. Seems like .320/21 tapered around 200-210 grains would be a good start. Probably more of a spitzer type. Is that on the right track? What’s been successful?


	IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1633 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: Bullet/mould advice for 32 Miller short. Reply #1 - Jul 21^st, 2022 at 12:58pm	Print Post
	The Mos .32 bullet works great in my .32-20CPA and .32-40. Mine casts at 205gr. (You need to *Login* or *Register* to view media files and links)

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

Dellet Frequent Elocutionist Offline Posts: 1090 Joined: May 19^th, 2017	Re: Bullet/mould advice for 32 Miller short. Reply #2 - Jul 21^st, 2022 at 1:55pm	Print Post
	rkaires wrote on Jul 21^st, 2022 at 12:58pm: The Mos .32 bullet works great in my .32-20CPA and .32-40. Mine casts at 205gr. (You need to *Login* or *Register* to view media files and links) That just seemed a bit large in base diameter for a .319. I do like his bullet design and have a couple in other calibers. Out of stock does not help the impatient shooter. Do you know your groove diameter?


	IP Logged

RSW Frequent Elocutionist Offline Posts: 1188 Location: Arizona Joined: Sep 8^th, 2006	Re: Bullet/mould advice for 32 Miller short. Reply #3 - Jul 21^st, 2022 at 2:11pm	Print Post
	Steve Brooks at Tru-Bore Moulds will cut you a mold to fit your rifle. I'd suggest a base diameter of .00l" over groove diameter. Front bearing band at bore dia. A chamber cast that includes about 1" of rifling will show you the leade ahead of the chamber. That will be useful in determining the diameters of the other bullet bearing bands. You might talk with Steve Brooks and probably send him that cast to get the best bullet for YOUR rifle. He usually delivers in less than a month. I've had him make me a dozen molds over the years and his work is always top notch, IMO.

	Randy W ASSRA 10211 - ISSA 125 There are indeed two Americas. Simply put, it is not the haves and have nots. The two Americans are in reality divided into those who do and those who don't.
	WWW IP Logged

critter68 Senior Forum Member ASSRA Board Member Offline Posts: 271 Location: Wisconsin Joined: May 31^st, 2018	Re: Bullet/mould advice for 32 Miller short. Reply #4 - Jul 21^st, 2022 at 3:39pm	Print Post
	Ditto RSW.

	ASSRA LIFE#294 NRA LIFE #194353342
	IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1633 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: Bullet/mould advice for 32 Miller short. Reply #5 - Jul 22^nd, 2022 at 6:43am	Print Post
	Dellet wrote on Jul 21^st, 2022 at 1:55pm: rkaires wrote on Jul 21^st, 2022 at 12:58pm: The Mos .32 bullet works great in my .32-20CPA and .32-40. Mine casts at 205gr. (You need to *Login* or *Register* to view media files and links) That just seemed a bit large in base diameter for a .319. I do like his bullet design and have a couple in other calibers. Out of stock does not help the impatient shooter. Do you know your groove diameter? FWIW my .32-20CPA barrel is a .319 15 twist Douglas and the .32-40 is a .321 14 twist Kreiger. The Mos spitzer shoots equally well in both. What RSW said is great advice. Bob

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.5979 seconds.