ASSRA Forum › General › Reloading the Single Shot Rifle › Re: 50-90 Sharps 1F or 2F & Advice ?
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Hot Topic (More than 10 Replies) Re: 50-90 Sharps 1F or 2F & Advice ? (Read 1081 times)
Bulseyetom
Oldtimer
*****
Offline



Posts: 957
Location: Santa Maria, Ca
Joined: Oct 31st, 2010
Re: 50-90 Sharps 1F or 2F & Advice ?
Jul 13th, 2022 at 10:25am
Print Post  
I am shooting a 512 grain Accurate Moulds  bullet with a large meplat in my 50-70 and that is about all I want.  I would not think anything heavier shot in a 50-90 would be fun to shoot!  Also I have found 16:1 alloy the best as especially 30:1 with smokeless loads leads bad!  Tom
  
Back to top
Twitter  
IP Logged
 
Hiwall55
Senior Forum Member
****
Offline



Posts: 468
Location: west central Illinois
Joined: Jun 30th, 2012
Re: 50-90 Sharps 1F or 2F & Advice ?
Reply #1 - Jul 14th, 2022 at 5:34am
Print Post  
My 50/90 shoots an accurate  mold ,670 grain Paper patch with smokeless, my 50/70 shoots an accurate  mold 470 grains with 66 grains of 1f. 50/90is 26 twist,50/70 
is 25 twist.
  
Back to top
 
IP Logged
 
MrTipUp
Frequent Elocutionist
*****
Offline


Quality is to a product
what character is to
a man

Posts: 1310
Location: Indiana
Joined: Feb 19th, 2020
Re: 50-90 Sharps 1F or 2F & Advice ?
Reply #2 - Jul 14th, 2022 at 6:13am
Print Post  
I, too, have heard bad things about using necessarily small charges of smokeless in large BP cases.  Any truth in that at all?  Are there precautions that should be followed?

Bill Lawrence
  
Back to top
 
IP Logged
 
Cbashooter
Frequent Elocutionist
*****
Offline



Posts: 1573
Location: Eastern Wa.
Joined: Mar 31st, 2018
Re: 50-90 Sharps 1F or 2F & Advice ?
Reply #3 - Jul 14th, 2022 at 9:27am
Print Post  
MrTipUp wrote on Jul 14th, 2022 at 6:13am:
I, too, have heard bad things about using necessarily small charges of smokeless in large BP cases.  Any truth in that at all?  Are there precautions that should be followed?

Bill Lawrence

I have a #1 in 416 Rigby that I shoot 24g of Unique with various cast bullets (no filler) i have had no issues.Also 16g in a 375 H&H.
and in the 45-70 I've used 12g Unique  for well over 30 years .
« Last Edit: Jul 14th, 2022 at 9:34am by Cbashooter »  
Back to top
 
IP Logged
 
derrickman
Junior Member
**
Offline



Posts: 88
Joined: Dec 2nd, 2015
Re: 50-90 Sharps 1F or 2F & Advice ?
Reply #4 - Jul 14th, 2022 at 12:39pm
Print Post  
I had a 50-90 Sharps that Bill Bagwell built for me many years ago. He said just fill it up with 1F & top it off with that flat nose RCBS bullet. We had a lot of fun with that rifle & rang a lot of steel plates.
Once I lost a deer that I'd shot due to the smoke. Considered going to smokeless but never did.
  
Back to top
 
IP Logged
 
Bulseyetom
Oldtimer
*****
Offline



Posts: 957
Location: Santa Maria, Ca
Joined: Oct 31st, 2010
Re: 50-90 Sharps 1F or 2F & Advice ?
Reply #5 - Jul 14th, 2022 at 12:41pm
Print Post  
The bullet I am using in my 50/70 is Accurate 51-504L.  It was designed to fit my rolling block as I have no freebore to speak of.  The beauty of Accurate moulds is that you can change any of the designs to fit your rifle and needs.  I have a 0.512/0.502 barrel with 24 twist and wanted a large meplat for hunting.  Hard alloys will not expand but with the  large meplat they do not need to.  As for powder, I use Accurate #5744 powder or Shooter's World Buffalo powder in many of my old large capacity cases.  Near as I can tell the powders are essentially the same and if you can find it, Buffalo Powder is cheaper.  Tom
  
Back to top
Twitter  
IP Logged
 
Hiwall55
Senior Forum Member
****
Offline



Posts: 468
Location: west central Illinois
Joined: Jun 30th, 2012
Re: 50-90 Sharps 1F or 2F & Advice ?
Reply #6 - Jul 14th, 2022 at 8:04pm
Print Post  
Another good one is a RCBS 50-515  that casts at .513 and 540 grains with Buffalo Rifle  powder at 30 grains. It a a very good load and you can use 5744 data  with BR Powder.
  
Back to top
 
IP Logged
 
Antonio
Junior Member
**
Offline



Posts: 50
Location: Schoharie, NY
Joined: Apr 5th, 2016
Re: 50-90 Sharps 1F or 2F & Advice ?
Reply #7 - Jul 14th, 2022 at 9:44pm
Print Post  
Seems like people are getting off track here. 50-90 2F would do well.
  
Back to top
 
IP Logged
 
Hiwall55
Senior Forum Member
****
Offline



Posts: 468
Location: west central Illinois
Joined: Jun 30th, 2012
Re: 50-90 Sharps 1F or 2F & Advice ?
Reply #8 - Jul 15th, 2022 at 6:26am
Print Post  
From lyman cast bullet handbook #3
4759-500 grain bullet-20.5 to 27.5,50/90
  
Back to top
 
IP Logged
 
Dusty Texian
Junior Member
**
Offline



Posts: 58
Joined: Aug 20th, 2013
Re: 50-90 Sharps 1F or 2F & Advice ?
Reply #9 - Jul 15th, 2022 at 7:06am
Print Post  
Not a 50-90 but in my 50-70 Gov. and 50-95 wcf the ffg Swiss has worked great . I started using  Old Eynsford Goex  1.5 F and the two rifles seem to like it also . Having used them both , I would try the 1.5 F  first . Your rifle will show what it likes best . Good luck enjoy the ride .
  
Back to top
 
IP Logged
 
moodyholler
Oldtimer
*****
Online



Posts: 697
Location: Blue Ridge
Joined: Oct 11th, 2005
Re: 50-90 Sharps 1F or 2F & Advice ?
Reply #10 - Jul 15th, 2022 at 9:14pm
Print Post  
My C Sharp's 50.90 shot well with 638 Tom Ballard 20.1, SPG, , Goex Cartridge 90 grains, Bell cases, Federal LR Match, it shot Master class scores in Silhouette with Tye River behind wheel. moodyholler
  
Back to top
YIMAIM  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.5632 seconds.