ASSRA Forum › General › Reloading the Single Shot Rifle › Non tapered 32-40 mould ?
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Non tapered 32-40 mould ? (Read 1231 times)
Brudford01
Full Member
***
Offline



Posts: 196
Location: Beaver Falls PA
Joined: May 18th, 2008
Non tapered 32-40 mould ?
Jun 20th, 2022 at 10:58am
Print Post  
Who makes a non tapered 32-40 Ballard mold for fixed 32-40  ? I have issues with my Lyman and Hoch tapered molds trying to get even a little crimp on those bullets . Lyman molds would be ok, however I hear they changed their name to  Out of Stock . Thanks
  
Back to top
 
IP Logged
 
gnoahhh
Oldtimer
*****
Offline



Posts: 829
Location: Gaithersburg, MD
Joined: Mar 31st, 2010
Re: Non tapered 32-40 mould ?
Reply #1 - Jun 20th, 2022 at 11:06am
Print Post  
I've had success using Accurate Mold's Hudson-design bullet. For that matter, they'll cut you a cavity to most any dimension you want.
  
Back to top
 
IP Logged
 
CajunRebel
Oldtimer
*****
Offline



Posts: 692
Location: Alexandria, VA
Joined: Nov 18th, 2007
Re: Non tapered 32-40 mould ?
Reply #2 - Jun 20th, 2022 at 6:38pm
Print Post  
I have a Hoch plain-base mould made for me, they should still have the cherry and be able to make another for you.  It's a non-tapered .32-40, #322200, 209gr using 1:25 alloy. I sized down to .321 with SPG lube.
  
Back to top
 
IP Logged
 
Brudford01
Full Member
***
Offline



Posts: 196
Location: Beaver Falls PA
Joined: May 18th, 2008
Re: Non tapered 32-40 mould ?
Reply #3 - Jun 20th, 2022 at 7:36pm
Print Post  
Thanks , I thought Hoch was out of business ?
  
Back to top
 
IP Logged
 
Win85
Participating Member
*
Offline



Posts: 36
Location: Bluegrass
Joined: Mar 30th, 2017
Re: Non tapered 32-40 mould ?
Reply #4 - Jun 27th, 2022 at 8:51am
Print Post  
I didn't know Hoch used cherries. Weren't they lathe bored?
  
Back to top
 
IP Logged
 
CajunRebel
Oldtimer
*****
Offline



Posts: 692
Location: Alexandria, VA
Joined: Nov 18th, 2007
Re: Non tapered 32-40 mould ?
Reply #5 - Jun 27th, 2022 at 7:28pm
Print Post  
Don't know, assumed.  If lathed, then greater opp6for a new mold.
  
Back to top
 
IP Logged
 
Green_Frog
Frequent Elocutionist
*****
Offline


"It ain't easy being green"
ASSRA Life #281

Posts: 4062
Location: Lynchburg, VA
Joined: Apr 18th, 2004
Re: Non tapered 32-40 mould ?
Reply #6 - Jun 28th, 2022 at 10:19am
Print Post  
I don’t know where you would find one today, but 25+ years ago I found what was already an antique then, an old integral handle Ideal 31952 in the 200 gr size. It was and is one of the most accurate bullets I’ve found for 32-40 fixed ammo.  It did well in the old nickel “John Wayne” cases with NRA 50-50lube and a charge of 13.6 gr of 4759.  I also liked a 200 grain Bud Welch bullet over about 16 gr (IIRC) of 4227.   

I mention these bullets not because you can order one but because you could start with these designs to have something appropriate made up. 

Froggie
  
Back to top
 
IP Logged
 
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2327
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Re: Non tapered 32-40 mould ?
Reply #7 - Jun 28th, 2022 at 3:23pm
Print Post  
Steve Brooks will make you one.  He made a nice tapered one for me, but he'll make pretty much any design.

Buffalo Arms will ( for a small charge ) let you modify dimensions on their existing designs so you could easily turn a tapered mold into a non-tapered. 

Chris.
  
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10625
Joined: Apr 8th, 2009
Re: Non tapered 32-40 mould ?
Reply #8 - Jun 28th, 2022 at 4:45pm
Print Post  
I do have a cylindrical Barry Darr Cherry that he had gifted to me. 
I have cut numerous bullet moulds with it and just for friends.
But unfortunately I am no longer cutting any more bullet moulds or I would have been more than happy to be able to also help you out.
  
" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10625
Joined: Apr 8th, 2009
Re: Non tapered 32-40 mould ?
Reply #9 - Jun 28th, 2022 at 4:59pm
Print Post  
Also one of the advantages of cutting a Cherrie cut mould is you can also adjust the length / weight to match any twist rate. And to also be able to bore out the basebands diameter to exactly what someone might actually want to have / to create for their own personal needs and wants. 
I have cut bullet moulds from 190 grains and up to 230 grains and I just wanted to mention the advantages for any of those who might be thinking about what is actually the best process to use if wanting cut their own and possibly also just for friends or even others in need.
  
" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.9341 seconds.