ASSRA Forum › General › Collecting Single Shot Rifles › To D&T barrel or not...?
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: [1] 2 3  Send TopicPrint
Very Hot Topic (More than 25 Replies) To D&T barrel or not...? (Read 6077 times)
ISS
Oldtimer
*****
Offline



Posts: 570
Joined: Feb 24th, 2013
To D&T barrel or not...?
Mar 19th, 2022 at 4:08pm
Print Post  
I bought the Miller prize rifle Jim Feren won at Coors.  It has not been drilled and tapped for scope blocks on the octagon barrel.

I would like to shoot it.  Should I go ahead and do it so that I can stick my big Unertl on it and shoot at least one match?  Or do I just leave it alone and enjoy looking at it?

thanks,

Rich

Smiley Smiley
  
Back to top
 
IP Logged
 
bluesman
Full Member
***
Offline



Posts: 192
Location: Paradise, California
Joined: May 29th, 2006
Re: To D&T barrel or not...?
Reply #1 - Mar 19th, 2022 at 5:37pm
Print Post  
It's  a tough decision....I am also trying to decide on drilling and tapping for scope blocks to mount a full length MVA scope on my old Hepburn Creedmoor....The rifle has been rebored from 44-100 to 45-100 and altered a bit over the last hundred and some years so she's no collector's piece but still...It's hard to think of altering it further.But I really want to see how it shoots with my aging eyes.

That Coors gun is probably gonna be a serious shooter....I'd be tempted to do it just to see what she'll do....Fat lot of help I am, eh?
  
Back to top
WWW  
IP Logged
 
MrTipUp
Frequent Elocutionist
*****
Offline


Quality is to a product
what character is to
a man

Posts: 1314
Location: Indiana
Joined: Feb 19th, 2020
Re: To D&T barrel or not...?
Reply #2 - Mar 19th, 2022 at 6:21pm
Print Post  
If the builders thought that although made as a prize, there was a chance the rifle would be shot with any real seriousness, you'd have thought they'd have drilled and tapped it themselves.

Bill Lawrence
  
Back to top
 
IP Logged
 
Cbashooter
Frequent Elocutionist
*****
Offline



Posts: 1568
Location: Eastern Wa.
Joined: Mar 31st, 2018
Re: To D&T barrel or not...?
Reply #3 - Mar 19th, 2022 at 7:18pm
Print Post  
MrTipUp wrote on Mar 19th, 2022 at 6:21pm:
If the builders thought that although made as a prize, there was a chance the rifle would be shot with any real seriousness, you'd have thought they'd have drilled and tapped it themselves.

Bill Lawrence


Agree! 
  
Back to top
 
IP Logged
 
ISS
Oldtimer
*****
Offline



Posts: 570
Joined: Feb 24th, 2013
Re: To D&T barrel or not...?
Reply #4 - Mar 19th, 2022 at 7:40pm
Print Post  
Yes, preserving it has merit.  Ron Long built it, so it has some value as one of his best.

Need more time to think this over.

Rich
  
Back to top
 
IP Logged
 
yamoon
Oldtimer
*****
Offline


NRA Life, ASSRA , GGCA,
MCA

Posts: 905
Location: Junction City Kansas
Joined: Feb 11th, 2012
Re: To D&T barrel or not...?
Reply #5 - Mar 19th, 2022 at 7:41pm
Print Post  
I own way too many rifles, maybe I am weird, but I don’t care to own a rifle I can’t shoot, life is too short for that.
Mike
  
Back to top
 
IP Logged
 
MrTipUp
Frequent Elocutionist
*****
Offline


Quality is to a product
what character is to
a man

Posts: 1314
Location: Indiana
Joined: Feb 19th, 2020
Re: To D&T barrel or not...?
Reply #6 - Mar 19th, 2022 at 7:50pm
Print Post  
That's fine, yamoon; but you're not the present caretaker of the Ron-Long-built prize rifle.

Bill Lawrence
  
Back to top
 
IP Logged
 
Cbashooter
Frequent Elocutionist
*****
Offline



Posts: 1568
Location: Eastern Wa.
Joined: Mar 31st, 2018
Re: To D&T barrel or not...?
Reply #7 - Mar 19th, 2022 at 8:11pm
Print Post  
yamoon wrote on Mar 19th, 2022 at 7:41pm:
I own way too many rifles, maybe I am weird, but I don’t care to own a rifle I can’t shoot, life is too short for that.
Mike


Agree. It's like marrying a virgin and keeping her that way...
  
Back to top
 
IP Logged
 
kensmachine
Oldtimer
*****
Offline



Posts: 574
Joined: Nov 21st, 2012
Re: To D&T barrel or not...?
Reply #8 - Mar 19th, 2022 at 8:40pm
Print Post  
My 2 cents on this it's Not a nice Ballard #7 or a nice old sharps . If Jim walked into Ron's shop and asked Ron to D&T after he won it I am sure Ron would have said what spacing do you want and that will be a week or two Ken
  
Back to top
 
IP Logged
 
jfeldman
ASSRA Board Member
*****
Offline



Posts: 1083
Location: Imperial Beach, Ca
Joined: Nov 5th, 2005
Re: To D&T barrel or not...?
Reply #9 - Mar 19th, 2022 at 8:59pm
Print Post  
What Ken said.

Regards,
Joe
  
Back to top
 
IP Logged
 
Dellet
Frequent Elocutionist
*****
Offline



Posts: 1099
Joined: May 19th, 2017
Re: To D&T barrel or not...?
Reply #10 - Mar 19th, 2022 at 9:09pm
Print Post  
Cbashooter wrote on Mar 19th, 2022 at 8:11pm:
yamoon wrote on Mar 19th, 2022 at 7:41pm:
I own way too many rifles, maybe I am weird, but I don’t care to own a rifle I can’t shoot, life is too short for that.
Mike


Agree. It's like marrying a virgin and keeping her that way...


Only shot twice,
once by the baseball team, once by the football team Cheesy
  
Back to top
 
IP Logged
 
bnice
Frequent Elocutionist
*****
Offline



Posts: 1861
Location: Iowa
Joined: Nov 30th, 2006
Re: To D&T barrel or not...?
Reply #11 - Mar 19th, 2022 at 10:08pm
Print Post  
I have always sold every gun I've had that was to collectable to shoot. I agree with Yomoon enjoy it. That said I think its a small group that would want it to collect and being D&T and shot won't matter enough to offset the pleasure of shooting it and the conversations it will bring. Also I think that there was a second rifle like that that was Max Goodwin's. Clark Ehlers owned it and then sold it at Rock Island Auction a few years ago. He shot it and I assume Max did to.
« Last Edit: Mar 19th, 2022 at 10:27pm by bnice »  
Back to top
 
IP Logged
 
yamoon
Oldtimer
*****
Offline


NRA Life, ASSRA , GGCA,
MCA

Posts: 905
Location: Junction City Kansas
Joined: Feb 11th, 2012
Re: To D&T barrel or not...?
Reply #12 - Mar 19th, 2022 at 10:40pm
Print Post  
Another Coors prize rifle was for sale a couple of years ago just a 40 minute drive away, I will admit I gave it some thought, but decided against it. It was a Ruger #1. 
Mike
  
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Offline



Posts: 3912
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: To D&T barrel or not...?
Reply #13 - Mar 20th, 2022 at 1:20am
Print Post  
On the other hand, maybe Ron didn't want D&T it with holes on a spacing that the winner couldn't use and was waiting to be told what was wanted. Of course, ISS, you have so many new rifles right now to shoot that it may be a while before you actually get around to this one so maybe you should just wait until you do to decide;-)
  
Back to top
 
IP Logged
 
ISS
Oldtimer
*****
Offline



Posts: 570
Joined: Feb 24th, 2013
Re: To D&T barrel or not...?
Reply #14 - Mar 20th, 2022 at 2:16am
Print Post  
I am going to hold off for now.

I also own one handgun I have not shot.  It is one of the Elmer Keith commemoratives S&W made.  29-3.  I need to sell it and buy a 29 I will shoot.  Any takers...?

Rich
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: [1] 2 3 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.5525 seconds.