ASSRA Forum › General › Single Shot Rifles › Re: Reproduction low wall rifles
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 [2]  Send TopicPrint
Very Hot Topic (More than 25 Replies) Re: Reproduction low wall rifles (Read 8170 times)
watchthewind
Frequent Elocutionist
*****
Offline



Posts: 1042
Location: Phoenix, AZ
Joined: Mar 10th, 2015
Re: Reproduction low wall rifles
Reply #15 - Oct 22nd, 2021 at 10:21am
Print Post  
Based upon my experience with a Reproduction Low Wall, the Winchester (Miroku) Low Wall can be a very accurate rifle. Mine served me well. The trigger can be adjusted down to about 2.5 pounds. 
What are looking to do with the rifle, hunt, collect, compete?
-Scott
  
ASSRA Member # 11408
Back to top
 
IP Logged
 
MrTipUp
Frequent Elocutionist
*****
Offline


Quality is to a product
what character is to
a man

Posts: 1382
Location: Indiana
Joined: Feb 19th, 2020
Re: Reproduction low wall rifles
Reply #16 - Oct 22nd, 2021 at 6:47pm
Print Post  
If you own the action it's yours to do whatever you want with it. 

This is just my opinion, of course, but it's people who act on the above rationale who create many of the headaches (and heartaches) I have to deal with as a restorer of guns and otherwise.

Bill Lawrence
  
Back to top
 
IP Logged
 
colt45sa
Junior Member
**
Offline



Posts: 57
Joined: Feb 5th, 2021
Re: Reproduction low wall rifles
Reply #17 - May 17th, 2022 at 8:50pm
Print Post  
watchthewind wrote on Oct 22nd, 2021 at 10:21am:
Based upon my experience with a Reproduction Low Wall, the Winchester (Miroku) Low Wall can be a very accurate rifle. Mine served me well. The trigger can be adjusted down to about 2.5 pounds. 
What are looking to do with the rifle, hunt, collect, compete?
-Scott

I have to agree with you 100%.  I now have three and I simply love them.  I mounted a 2x7 Leupold on the first one and headed to the range.  I simply grabbed a box of cartridges at random and headed out.  To my complete unexpected amazement it shot far, far better than I could have wished for.  I tried to insert a picture of the final target for that day but wasn't able to follow the instructions well enough.  Anyway, it was one ragged hole a 40 yds.  I'd say that was acceptable~!
  
Back to top
 
IP Logged
 
CharleHunter
Senior Forum Member
****
Offline



Posts: 371
Joined: Feb 8th, 2019
Re: Reproduction low wall rifles
Reply #18 - May 18th, 2022 at 4:43am
Print Post  
JLouis wrote on Oct 15th, 2021 at 6:16pm:
When Pope Milled off one of the HiWalls on a HiWall action he was well aware of how difficult it could actually be. What is interesting to me is I know of no one who has also done the same as he.


I have a Ron Snover built Highwall in .22 with the sidewall milled off/down.  Smiley
  
Back to top
 
IP Logged
 
Skalkaho
Oldtimer
*****
Offline



Posts: 835
Location: Montana
Joined: Sep 29th, 2006
Re: Reproduction low wall rifles
Reply #19 - May 19th, 2022 at 7:36pm
Print Post  
Charliehunter...post a pic of the Hiwall/lowall. Like to see it.Thankyou
John your little pincher is cute too! where did you pick it up?
These inquireing bent up fingers want to know!
  
May the Bullet Gods be with you.......
Back to top
 
IP Logged
 
colt45sa
Junior Member
**
Offline



Posts: 57
Joined: Feb 5th, 2021
Re: Reproduction low wall rifles
Reply #20 - May 20th, 2022 at 6:06pm
Print Post  
watchthewind wrote on Oct 22nd, 2021 at 10:21am:
Based upon my experience with a Reproduction Low Wall, the Winchester (Miroku) Low Wall can be a very accurate rifle. Mine served me well. The trigger can be adjusted down to about 2.5 pounds. 
What are looking to do with the rifle, hunt, collect, compete?
-Scott

That's been my experience exactly~!  Great looking with its crescent butt, 1/2 rnd 1/2 oct barrel, very nice wood, and accurate as the devil~!  Life doesn't get much better for me.  I don't need wall plaques or certificates. My rewards come from looking at something beautiful and shoots accurately~!!
  
Back to top
 
IP Logged
 
.22Hepburn
Oldtimer
*****
Offline



Posts: 839
Location: Pennsylvania
Joined: Feb 18th, 2008
Re: Reproduction low wall rifles
Reply #21 - Jun 15th, 2022 at 5:56pm
Print Post  
Pope wasn’t the only one to cut down the sides of receivers. I have a highly modified Hepburn that has the right side of the receiver cut down to aid loading/unloading. The gunsmith who built this position/prone .22 is unknown.
  
Back to top
Facebook  
IP Logged
 
rkba2nd
Frequent Elocutionist
*****
Offline



Posts: 2057
Location: earth
Joined: Feb 16th, 2009
Re: Reproduction low wall rifles
Reply #22 - Jun 15th, 2022 at 7:21pm
Print Post  
I also have a martini cadet with lowered side wall to help in loading. access and extraction not a problem!!! Snapp did the work many moons ago.
  
rkba2nd
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 17434
Location: Oregon
Joined: Feb 2nd, 2009
Re: Reproduction low wall rifles
Reply #23 - Jun 19th, 2022 at 11:18am
Print Post  
.22Hepburn wrote on Jun 15th, 2022 at 5:56pm:
Pope wasn’t the only one to cut down the sides of receivers. I have a highly modified Hepburn that has the right side of the receiver cut down to aid loading/unloading. The gunsmith who built this position/prone .22 is unknown.


I had a Buhmiller built High Wall in .22LR that had the right side cut down to allow better access. Beautifully stocked and checkered. I sold it as I just couldn't wrap my head around the receiver being cut down.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
colt45sa
Junior Member
**
Offline



Posts: 57
Joined: Feb 5th, 2021
Re: Reproduction low wall rifles
Reply #24 - Jul 10th, 2022 at 8:59am
Print Post  
CajunRebel wrote on Oct 15th, 2021 at 5:54pm:
But difficulty loading also occurs with low-walls, albeit, less so.  My 22lr is a low-wall and glad to have have it.

Thats's especially true when you have a scope mounted on it.  Adk me, I know~!
  
Back to top
 
IP Logged
 
colt45sa
Junior Member
**
Offline



Posts: 57
Joined: Feb 5th, 2021
Re: Reproduction low wall rifles
Reply #25 - Jul 13th, 2022 at 9:55am
Print Post  
watchthewind wrote on Oct 22nd, 2021 at 10:21am:
Based upon my experience with a Reproduction Low Wall, the Winchester (Miroku) Low Wall can be a very accurate rifle. Mine served me well. The trigger can be adjusted down to about 2.5 pounds. 
What are looking to do with the rifle, hunt, collect, compete?
-Scott

You're dead right about the accuracy of the Miroku built low-walls, but for hunting, not so great.  Thumbing the hammer back when you see an animal target is difficult because of the lack of space between the scope and the hammer, and you're certainly not going to carry it around with the hammer cocked~!.
  
Back to top
 
IP Logged
 
gnoahhh
Frequent Elocutionist
*****
Offline



Posts: 1017
Location: Gaithersburg, MD
Joined: Mar 31st, 2010
Re: Reproduction low wall rifles
Reply #26 - Jul 13th, 2022 at 11:52am
Print Post  
I have two Miroku LW's, a Winchester-branded .22 and a Browning-branded .223, whose purposes in my life is for hunting. I don't find it difficult to cock them when a target presents itself. It just takes a little practice to establish the muscle memory in your thumb to execute that maneuver. Is it as handy as flicking the safety off on a repeater? No, but it is part-and-parcel with the whole philosophy behind hunting with a single shot - slow deliberate careful taking of the one shot you're gonna get.
  
Back to top
 
IP Logged
 
colt45sa
Junior Member
**
Offline



Posts: 57
Joined: Feb 5th, 2021
Re: Reproduction low wall rifles
Reply #27 - Jul 13th, 2022 at 4:28pm
Print Post  
I wasn't looking to get into an argument over cocking the hammer on the Miroku 1885.  I just was making a comment about my perception.
  
Back to top
 
IP Logged
 
sureshot
Senior Forum Member
****
Offline



Posts: 334
Location: Snohomish
Joined: May 27th, 2007
Re: Reproduction low wall rifles
Reply #28 - Jul 13th, 2022 at 5:28pm
Print Post  
I see John Mullins shot 14/15 chickens in the 22 BPCRA nationals today with what looks like a Miroku LW.
He also shot 56/60 yesterday.

  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.8198 seconds.