ASSRA Forum - Is need dimensions on lever Spring for high wall

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Is need dimensions on lever Spring for high wall

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Is need dimensions on lever Spring for high wall (Read 1213 times)

Cbashooter Frequent Elocutionist Offline Posts: 1631 Location: Eastern Wa. Joined: Mar 31^st, 2018	Is need dimensions on lever Spring for high wall Sep 21^st, 2021 at 2:36pm	Print Post
	My hi wall is missing the little Spring and detent that holds a lever up when closed. I've got a picture of one but I'm not entirely sure is sure of dimensions. If or if anybody knows where I could get one this is a coil Spring action of course


	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: Is need dimensions on lever Spring for high wall Reply #1 - Sep 21^st, 2021 at 3:08pm	Print Post
	Not sure if this might be of any help but MVA might be able to help you out. The below link should take you to a break down of all the action parts and their related parts numbers. You will probably have to click on the trigger system, DST, Single Set etc. to get to the drawing to come up and what I also had to do. (You need to *Login* or *Register* to view media files and links)

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: Is need dimensions on lever Spring for high wall Reply #2 - Sep 21^st, 2021 at 3:28pm	Print Post
	On another note Pope would eliminate any unnecessary parts and he would bend the trunnions to then create a friction fit to hold the lever up and throw the other parts away on a HiWall action.

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

Cbashooter Frequent Elocutionist Offline Posts: 1631 Location: Eastern Wa. Joined: Mar 31^st, 2018	Re: Is need dimensions on lever Spring for high wall Reply #3 - Sep 21^st, 2021 at 3:33pm	Print Post
	JLouis wrote on Sep 21^st, 2021 at 3:28pm: On another note Pope would eliminate any unnecessary parts and he would bend the trunnions to then create a friction fit to hold the lever up and throw the other parts away on a HiWall action. Richard Hoch built this rifle I'm thinking he left it out for a reason. Maybe I should just live with it thanks for the input


	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: Is need dimensions on lever Spring for high wall Reply #4 - Sep 21^st, 2021 at 4:24pm	Print Post
	I apologize I thought you were talking about about something else and my error. But I do hope you can get it all sorted out!

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

singleshotsam Oldtimer Offline Posts: 594 Location: Silver City NM Joined: Jan 15^th, 2009	Re: Is need dimensions on lever Spring for high wall Reply #5 - Sep 22^nd, 2021 at 9:29am	Print Post
	C. Sharps makes the coil spring type action using the spring and plunger to hold the lever closed. I bought one for a project some time back and it fit the original action perfectly. Possibly give them a call, I stopped in on my way back from the Quigley and purchased some parts for a project. The girls in the office were quite helpful filling my order.


	IP Logged

idjeffp Senior Forum Member Offline Posts: 364 Location: Boise, ID Joined: Nov 11^th, 2017	Re: Is need dimensions on lever Spring for high wall Reply #6 - Sep 22^nd, 2021 at 10:51am	Print Post
	My "modern" made coil spring HW was also missing the lever spring and plunger and I was able to get them from C Sharps last month. Thinking the spring was $3 and the plunger $5, so I ordered 2-sets to have a backup just in case. It was something like $20 delivered. Fit was perfect!


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.3976 seconds.