ASSRA Forum › General › Gunsmithing Single Shot Rifles › 38-50 reamer
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic 38-50 reamer (Read 863 times)
Airpistol
Participating Member
*
Offline



Posts: 12
Location: Idaho
Joined: Jan 21st, 2013
38-50 reamer
Sep 13th, 2021 at 11:46pm
Print Post  
I was wondering if anyone has a Dan Theodore reamer for a 38-50 Hepburn to rent or if anyone has used the 38-50 Hepburn reamer made by PTG or has the specs for the PTG reamer
thanks
  
Back to top
 
IP Logged
 
JerryH
Frequent Elocutionist
*****
Offline


ASSRA Member #10876

Posts: 1327
Location: Easton, CA
Joined: Nov 9th, 2014
Re: 38-50 reamer
Reply #1 - Sep 14th, 2021 at 12:17am
Print Post  
Don't have the reamer, but be aware that Dan designed his reamer to be used with R-P 30-40 Krag brass. My friend used Winchester brass instead and had to turn the necks. His rifle never did shoot as well as mine. I used the R-P brass.

I'll check with my friend tomorrow to see if he still has the reamer. It's been 15 years so don't hold your breath.

JerryH
  
I'm not a complete idiot, some of my parts are missing.
Back to top
 
IP Logged
 
Airpistol
Participating Member
*
Offline



Posts: 12
Location: Idaho
Joined: Jan 21st, 2013
Re: 38-50 reamer
Reply #2 - Sep 14th, 2021 at 8:50am
Print Post  
thanks
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.6766 seconds.