ASSRA Forum › General › Reloading the Single Shot Rifle › Do you know what this is....
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Hot Topic (More than 10 Replies) Do you know what this is.... (Read 2319 times)
Retreever
Full Member
***
Offline



Posts: 198
Joined: Mar 21st, 2020
Do you know what this is....
Aug 28th, 2021 at 11:03am
Print Post  
Came in a box lot I bought at a recent auction, described as "Black Powder Lube Extruder as per Paul Matthews Design". I'd like to get more info on it - I Googled the description but only thing came up was a couple books written by Paul Matthews.
  
Back to top
 
IP Logged
 
Marlene
Senior Forum Member
****
Offline



Posts: 276
Joined: Oct 30th, 2015
Re: Do you know what this is....
Reply #1 - Aug 28th, 2021 at 11:11am
Print Post  
It is meant to make a ribbon of lube, to be pushed over the mouth of a case to put a "lube cookie" or "grease cookie" between the bullet and an over-powder wad. This is an especially useful practice when shooting paper-patched bullets with no grease grooves in the bullet. 

I dunno what this was supposed to screw into to push the plunger, but the idea is to fill the thing up with lube and then push the plunger and it would squeeze lube out through the slot like a syringe.
  
Back to top
 
IP Logged
 
Bent_Ramrod
Frequent Elocutionist
*****
Offline



Posts: 1544
Location: Southern Arizona
Joined: Feb 8th, 2006
Re: Do you know what this is....
Reply #2 - Aug 28th, 2021 at 11:24am
Print Post  
If the thread is 7/8” x 14 tpi, you would put it in your loading press, unscrew the top, insert a stick of lube, reattach the top, and put a shell holder on your press ram.

A pull on the lever will squeeze a ribbon of lube out of the slot on top.

If it’s some other thread size, then you’re missing the squeezer part.  This could be a lever or a hand-screw arrangement.  If the lube was soft enough, I guess you could push the plunger rod down against a bench top.
  
Back to top
 
IP Logged
 
Retreever
Full Member
***
Offline



Posts: 198
Joined: Mar 21st, 2020
Re: Do you know what this is....
Reply #3 - Aug 28th, 2021 at 2:42pm
Print Post  
Bent_Ramrod wrote on Aug 28th, 2021 at 11:24am:
If the thread is 7/8” x 14 tpi, you would put it in your loading press, unscrew the top, insert a stick of lube, reattach the top, and put a shell holder on your press ram.

A pull on the lever will squeeze a ribbon of lube out of the slot on top.

If it’s some other thread size, then you’re missing the squeezer part.  This could be a lever or a hand-screw arrangement.  If the lube was soft enough, I guess you could push the plunger rod down against a bench top.


And the winner is Bent_Ramrod!


  
Back to top
 
IP Logged
 
OLD TUCK
Senior Forum Member
****
Offline



Posts: 469
Location: Middleborough MA
Joined: Oct 5th, 2017
Re: Do you know what this is....
Reply #4 - Aug 28th, 2021 at 3:24pm
Print Post  
Yea! I bought one of those a while ago. The plunger end has a "T" wrench in it to squeeze the lube out. Mine must have been made for an Orangatang as the Ribbon would be about 1/4" thick. Looked it over and decided I would make up an
insert for the product end to get a thinner Ribbon. Will need it some day. HTH,
FITZ, OLD TUCK Smiley
  
Back to top
 
IP Logged
 
John Boy
Ex Member


Re: Do you know what this is....
Reply #5 - Aug 28th, 2021 at 4:15pm
Print Post  
Have had this one for a long time  ….   
(You need to Login or Register to view media files and links)
  
Back to top
 
IP Logged
 
bpjack
Frequent Elocutionist
*****
Offline



Posts: 3537
Location: East Olympia, WA
Joined: May 18th, 2008
Re: Do you know what this is....
Reply #6 - Aug 28th, 2021 at 6:43pm
Print Post  
John Boy,

Which shoots best, chocolate or vanilla icing?

Jack
  
ASSRA # 11318
Experience is something you don't get until just after you need it.
Back to top
 
IP Logged
 
John Boy
Ex Member


Re: Do you know what this is....
Reply #7 - Aug 28th, 2021 at 7:32pm
Print Post  
Jack, Carmel Fudge.  …  Grin
  
Back to top
 
IP Logged
 
bpjack
Frequent Elocutionist
*****
Offline



Posts: 3537
Location: East Olympia, WA
Joined: May 18th, 2008
Re: Do you know what this is....
Reply #8 - Aug 28th, 2021 at 7:38pm
Print Post  
It has got to taste better than Javelina Schuetzen lube!!
  
ASSRA # 11318
Experience is something you don't get until just after you need it.
Back to top
 
IP Logged
 
art_ruggiero
Frequent Elocutionist
*****
Offline



Posts: 1189
Location: CT
Joined: Dec 14th, 2008
Re: Do you know what this is....
Reply #9 - Aug 29th, 2021 at 11:08am
Print Post  
ya but that javelin is sooo smith in the morning   art Cheesy
  
Back to top
 
IP Logged
 
1isenough
Full Member
***
Offline



Posts: 202
Location: Louisville, KY
Joined: Dec 28th, 2017
Re: Do you know what this is....
Reply #10 - Aug 29th, 2021 at 12:46pm
Print Post  
It's a pasta extruder!
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.8580 seconds.