ASSRA Forum - Shilen RF Barrel

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Shilen RF Barrel

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Normal Topic

Shilen RF Barrel (Read 2076 times)

SSShooter Frequent Elocutionist Offline Posts: 2942 Location: Southern NJ Joined: Aug 1^st, 2010	Shilen RF Barrel Jul 26^th, 2021 at 4:22pm	Print Post
	Anyone have any experience shooting the standard Shilen 6-groove 16" twist 22 rimfire barrel? Looking at one and wondering if I should hold out for their 'rachet-rifled' barrel. Thanks.

	Glenn - Stevens 044 1/2, Bartlein SS 5R barrel in 22LR
	GTalk IP Logged

colo native Oldtimer Offline Posts: 760 Location: Barren Ridge, Va Joined: Dec 27^th, 2007	Re: Shilen RF Barrel Reply #1 - Jul 26^th, 2021 at 4:33pm	Print Post
	Hold out for a Ratchet, I have on and its well worth in, Gail at CPA did one for me, HOLD OUT----U will not regret it---


	IP Logged

oneatatime Frequent Elocutionist Offline Posts: 4465 Location: Rocky Mountains Joined: Oct 30^th, 2011	Re: Shilen RF Barrel Reply #2 - Jul 26^th, 2021 at 5:44pm	Print Post
	I have the standard on my CPA. Shoots pretty good.


	IP Logged

.22Hepburn Oldtimer Offline Posts: 844 Location: Pennsylvania Joined: Feb 18^th, 2008	Re: Shilen RF Barrel Reply #3 - Jul 29^th, 2021 at 5:04pm	Print Post
	Go with the Ratchet barrel.


	Facebook IP Logged

John Taylor Frequent Elocutionist Offline Posts: 1850 Location: Lewiston, ID Joined: Oct 23^rd, 2006	Re: Shilen RF Barrel Reply #4 - Jul 30^th, 2021 at 9:50am	Print Post
	I wonder how a ratchet barrel would shoot if it were installed backwards.

	John Taylor Machinist/gunsmith
	WWW IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: Shilen RF Barrel Reply #5 - Jul 30^th, 2021 at 10:36am	Print Post
	I had a Rimfire CPA with a Shilen Barrel and a match chamber. Not the type of barrel currently being talked about and it was amazingly extremely competitive. Once I found out what it liked the best 250's at a 100 yards were very doable if I did my part.

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

GT Frequent Elocutionist Offline Posts: 2368 Location: Northeast Wyoming Joined: Jun 28^th, 2015	Re: Shilen RF Barrel Reply #6 - Jul 30^th, 2021 at 11:12am	Print Post
	As if I don't have enough going on, I'm going to try and squeeze this in before my classes start in a month. It's a little sharps with a Shilen Ratchet, 4 groove 22rf. Glenn, do the ratchet rifling and we'll compare notes. I did go with a 1:10 twist to continue experiments with extreme yardages. Regards, Greg

	"To invent, you need a good imagination and a pile of junk" T. A. Edison "The trouble ain't that there is too many fools, but that the lightning ain't distributed right" M.T.
	IP Logged

S99VG Oldtimer Offline Posts: 514 Location: CA Joined: Feb 1^st, 2020	Re: Shilen RF Barrel Reply #7 - Jul 31^st, 2021 at 10:35am	Print Post
	Becaue I do not know I have to ask what is a rachet Shilen barrel and what makes them so outstanding? Thanks


	IP Logged

GT Frequent Elocutionist Offline Posts: 2368 Location: Northeast Wyoming Joined: Jun 28^th, 2015	Re: Shilen RF Barrel Reply #8 - Jul 31^st, 2021 at 11:14am	Print Post
	Not saying they're outstanding, just something different that may offer some improvement??? They say they clean easier, maybe seal and prevent gas blow-by in a lesser pressure case? Maybe a gimmick, been a round for quite a while. The image on the right... Greg

	"To invent, you need a good imagination and a pile of junk" T. A. Edison "The trouble ain't that there is too many fools, but that the lightning ain't distributed right" M.T.
	IP Logged

S99VG Oldtimer Offline Posts: 514 Location: CA Joined: Feb 1^st, 2020	Re: Shilen RF Barrel Reply #9 - Aug 1^st, 2021 at 1:07am	Print Post
	Interesting. Thanks!


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.4845 seconds.