ASSRA Forum - Rodney Storie High Wall - Suggestions?

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Rodney Storie High Wall - Suggestions?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: [1] 2

Hot Topic (More than 10 Replies)

Rodney Storie High Wall - Suggestions? (Read 4774 times)

LTC B Full Member Offline Posts: 237 Location: Fife Lake, MI Joined: Apr 26^th, 2012	Rodney Storie High Wall - Suggestions? Jul 23^rd, 2021 at 8:21am	Print Post
	I just bought a Winchester High Wall casting set from Rodney Storie and want to get started. I thought you could buy the blueprint for $10 on the forum, but I don't see that post anymore. I think I need those blueprints, and Rodney didn't include them. Any insights anyone would like to share on finishing the action would be greatly appreciated! The gunsmithing books are nice references, but no start-to-finish information that I've seen for a project like this.


	IP Logged

Skalkaho Oldtimer Offline Posts: 860 Location: Montana Joined: Sep 29^th, 2006	Re: Rodney Storie High Wall - Suggestions? Reply #1 - Jul 23^rd, 2021 at 10:46am	Print Post
	(You need to *Login* or *Register* to view media files and links)
	« Last Edit: Jul 23^rd, 2021 at 11:19am by Skalkaho »
	May the Bullet Gods be with you.......
	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: Rodney Storie High Wall - Suggestions? Reply #2 - Jul 23^rd, 2021 at 11:03am	Print Post
	You should be able to get the plans that you need from the ASSRA Archives.

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

Chuckster Frequent Elocutionist Offline Posts: 2310 Location: Colorado Joined: May 15^th, 2008	Re: Rodney Storie High Wall - Suggestions? Reply #3 - Jul 23^rd, 2021 at 11:07am	Print Post
	(You need to *Login* or *Register* to view media files and links)


	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: Rodney Storie High Wall - Suggestions? Reply #4 - Jul 23^rd, 2021 at 11:26am	Print Post
	Thank you Chuckster!

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

LTC B Full Member Offline Posts: 237 Location: Fife Lake, MI Joined: Apr 26^th, 2012	Re: Rodney Storie High Wall - Suggestions? Reply #5 - Jul 24^th, 2021 at 12:42pm	Print Post
	Thanks. I knew where to get it previously, but forgot. It would be nice to get some input from folks who have put one of these together. You would think there would be a comprehensive reference, but, not that I've seen. Rats!


	IP Logged

Amoretti Full Member Offline Posts: 222 Location: thermopolis, Wy Joined: Nov 2^nd, 2009	Re: Rodney Storie High Wall - Suggestions? Reply #6 - Jul 24^th, 2021 at 1:45pm	Print Post
	After building a Borchardt from Rodney I suggest getting an original to study. Buy one and resell or borrow one.


	IP Logged

GT Frequent Elocutionist Online Posts: 2368 Location: Northeast Wyoming Joined: Jun 28^th, 2015	Re: Rodney Storie High Wall - Suggestions? Reply #7 - Jul 24^th, 2021 at 4:41pm	Print Post
	Steve, sent you a PM Greg

	"To invent, you need a good imagination and a pile of junk" T. A. Edison "The trouble ain't that there is too many fools, but that the lightning ain't distributed right" M.T.
	IP Logged

gwahir Senior Forum Member Offline Ve gets too soon olt und too late shmart. Posts: 452 Location: montana Joined: Dec 31^st, 2005	Re: Rodney Storie High Wall - Suggestions? Reply #8 - Jul 25^th, 2021 at 12:01pm	Print Post
	An investment casting will be under size compared to the original (15%, I think), so original dimensions do not apply.


	IP Logged

jimmy Senior Forum Member Offline Now available in Oklahoma. Posts: 466 Location: Skiatook Joined: May 12^th, 2009	Re: Rodney Storie High Wall - Suggestions? Reply #9 - Jul 25^th, 2021 at 4:25pm	Print Post
	I believe the molds are oversized to accommodate for shrinkage


	IP Logged

gwahir Senior Forum Member Offline Ve gets too soon olt und too late shmart. Posts: 452 Location: montana Joined: Dec 31^st, 2005	Re: Rodney Storie High Wall - Suggestions? Reply #10 - Jul 25^th, 2021 at 9:33pm	Print Post
	jimmy wrote on Jul 25^th, 2021 at 4:25pm: I believe the molds are oversized to accommodate for shrinkage Perhaps. Rodney could tell us.


	IP Logged

fallingblock ASSRA Board Member Offline Posts: 651 Location: Wisconsin Joined: Apr 16^th, 2004	Re: Rodney Storie High Wall - Suggestions? Reply #11 - Jul 25^th, 2021 at 9:56pm	Print Post
	The plans from the ASSRA Archives were done for working with Rodney's casting kits. the cost is $10.00 on 8.5"x11" post paid. Will always take more $$ as it helps keep the Archives open. Cheers, Laurie

	Cheers, Laurie ASSRA Secretary & Archivist
	IP Logged

ISS Oldtimer Offline Posts: 570 Joined: Feb 24^th, 2013	Re: Rodney Storie High Wall - Suggestions? Reply #12 - Aug 5^th, 2021 at 4:19am	Print Post
	just an opinion; but if you figure/value your time at more than $1.00 an hour I would suggest just buying one from MVA. jmho... Rich


	IP Logged

MG-42 Participating Member Offline Posts: 45 Joined: Jul 14^th, 2015	Re: Rodney Storie High Wall - Suggestions? Reply #13 - Aug 5^th, 2021 at 9:39am	Print Post
	It would take away from the experience from building one.


	IP Logged

ssrifles Senior Forum Member Offline Posts: 321 Joined: Mar 23^rd, 2009	Re: Rodney Storie High Wall - Suggestions? Reply #14 - Aug 5^th, 2021 at 10:02am	Print Post
	i did one last year at a gunsmithing class that GT here puts on at the gillette college.not being one to do just the plain single trigger straight grip hi wall that everuone was doing i did a pistol grip double set trigger lo wall with a pope lever. i had never done one before.lot of work and a lot of priceless experience. GT is a great teacher and i learned a lot from him.(don't tell him i said this,his head will get to big).this year i an gonna do an 84 farrow.the time is well spent if you are seeking knowledge and an appreciation of what it takes to gettin them shooting.jump in with both feet and hang on for some frustating moments and a lot of wow it works moments. good luck tony <><


	IP Logged

Page Index Toggle

Pages: [1] 2

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.7196 seconds.