ASSRA Forum - How and What to Convert a 25 Rimfire Barrel To?

ASSRA Forum › General › Gunsmithing Single Shot Rifles › How and What to Convert a 25 Rimfire Barrel To?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1 [2]

How and What to Convert a 25 Rimfire Barrel To? (Read 4131 times)

Sure shot Frequent Elocutionist Offline Posts: 1166 Location: East central Iowa Joined: Jun 22^nd, 2020	Re: How and What to Convert a 25 Rimfire Barrel To? Reply #15 - Jul 19^th, 2021 at 12:17pm	Print Post
	I think it would be easiest for you to just make .25 RF cartridges from .17 WSM, then you wouldn’t have to modify your rifle. I have an 044 1/2 in .25 RF, and a 44 1/2 .25 RF, both with excellent bores, I enjoy shooting them both with .17 WSM made into .25 Stevens. You can also use .27 caliber nail gun loads and breech seat the bullets.


	IP Logged

S99VG Oldtimer Offline Posts: 514 Location: CA Joined: Feb 1^st, 2020	Re: How and What to Convert a 25 Rimfire Barrel To? Reply #16 - Jul 19^th, 2021 at 1:42pm	Print Post
	Sure shot wrote on Jul 19^th, 2021 at 12:17pm: I think it would be easiest for you to just make .25 RF cartridges from .17 WSM, then you wouldn’t have to modify your rifle. I have an 044 1/2 in .25 RF, and a 44 1/2 .25 RF, both with excellent bores, I enjoy shooting them both with .17 WSM made into .25 Stevens. You can also use .27 caliber nail gun loads and breech seat the bullets. Thanks


	IP Logged

jimmy Senior Forum Member Offline Now available in Oklahoma. Posts: 466 Location: Skiatook Joined: May 12^th, 2009	Re: How and What to Convert a 25 Rimfire Barrel To? Reply #17 - Jul 20^th, 2021 at 1:56pm	Print Post
	My 25 RF has a .257 groove diameter. Several other people have mentioned the same. I'm shooting the nail gun loads and airgun bullets. My only 25 bullet mold is too heavy.


	IP Logged

Pages: 1 [2]

‹ Previous Topic | Next Topic ›

Page completed in 0.3805 seconds.