ASSRA Forum - rolling block tang screw holes

ASSRA Forum › General › Gunsmithing Single Shot Rifles › rolling block tang screw holes

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

rolling block tang screw holes (Read 1336 times)

cheatin_charlie Senior Forum Member Online Posts: 425 Location: ohio Joined: Jan 10^th, 2009	rolling block tang screw holes Jul 16^th, 2021 at 12:42pm	Print Post
	After noon, I am trying to find out the hole spacing and thread size for a Remington #1 1/2 action also distance of rear hole to the stock screw hole in the tang. Thanks Charlie


	IP Logged

jimmy Senior Forum Member Offline Now available in Oklahoma. Posts: 466 Location: Skiatook Joined: May 12^th, 2009	Re: rolling block tang screw holes Reply #1 - Jul 16^th, 2021 at 2:25pm	Print Post
	Seems like the 1 1/2 didn't have them. My memory is faulty at times though.


	IP Logged

cheatin_charlie Senior Forum Member Online Posts: 425 Location: ohio Joined: Jan 10^th, 2009	Re: rolling block tang screw holes Reply #2 - Jul 16^th, 2021 at 2:54pm	Print Post
	What would be the hole spacing for a number 1 action?


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 18036 Location: Oregon Joined: Feb 2^nd, 2009	Re: rolling block tang screw holes Reply #3 - Jul 16^th, 2021 at 4:02pm	Print Post
	All Rolling Block sporting rifles use the std. 1.937" spacing. Distance from center of stock screw to rear hole is @.6" centers. Holes are either 10-32, or 3/16-36 size. Could be either based on the era. Not all #1 nor all #1 1/2 had tang sight holes as standard, but both could have them if the customer requested it.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

cheatin_charlie Senior Forum Member Online Posts: 425 Location: ohio Joined: Jan 10^th, 2009	Re: rolling block tang screw holes Reply #4 - Jul 16^th, 2021 at 4:38pm	Print Post
	Thank you that is the info I needed. Charlie


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.7763 seconds.