ASSRA Forum › General › Gunsmithing Single Shot Rifles › Who rebores barrels to 50 caliber
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Who rebores barrels to 50 caliber (Read 2017 times)
Bulseyetom
Frequent Elocutionist
*****
Offline



Posts: 1025
Location: Santa Maria, Ca
Joined: Oct 31st, 2010
Who rebores barrels to 50 caliber
Jun 19th, 2021 at 6:00pm
Print Post  
I have a #5 Rolling Block with a heavy barrel in 250 Savage that I am considering converting to a 50-70 Govt.  Any recommendations as to who could do the rebore, rechamber and modify the extractor?  The other alternative is to rebarrel but I think this would be easier as there would be no stock work required.  Tom
  
Back to top
Twitter  
IP Logged
 
Hiwall55
Senior Forum Member
****
Offline



Posts: 468
Location: west central Illinois
Joined: Jun 30th, 2012
Re: Who rebores barrels to 50 caliber
Reply #1 - Jun 20th, 2021 at 3:01am
Print Post  
Tom, I had JES rebore a barrel on a pedersoli sharps to 50 caliber, I picked the bore,groove and twist and he chambered it and returned it in 2 weeks. It shoots great. Went with an Accurate  bullet, 470 grain version of the 50 government bullet.
  
Back to top
 
IP Logged
 
Schuetzendave
Frequent Elocutionist
*****
Offline


Retired Ex-Shooter

Posts: 4232
Location: St. Albert, Alberta
Joined: Jan 28th, 2005
Re: Who rebores barrels to 50 caliber
Reply #2 - Jun 20th, 2021 at 8:15am
Print Post  
Ron Smith (RKS Enterprises) Wimborne, Alberta, Canada.
  
Back to top
 
IP Logged
 
ballardhepburnmich
ASSRA Board Member
*****
Offline



Posts: 598
Location: Scotts,mi.
Joined: May 20th, 2015
Re: Who rebores barrels to 50 caliber
Reply #3 - Jun 21st, 2021 at 12:42am
Print Post  
Who is JES?
Lee Gibbs pres.ASSRA
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 18048
Location: Oregon
Joined: Feb 2nd, 2009
Re: Who rebores barrels to 50 caliber
Reply #4 - Jun 21st, 2021 at 10:12am
Print Post  
ballardhepburnmich wrote on Jun 21st, 2021 at 12:42am:
Who is JES?
Lee Gibbs pres.ASSRA


A reboring/rifling service in Cottage Grove, Oregon.

(You need to Login or Register to view media files and links)
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
John Rigby
Full Member
***
Offline



Posts: 241
Location: Midwest
Joined: Nov 8th, 2005
Re: Who rebores barrels to 50 caliber
Reply #5 - Jun 24th, 2021 at 12:37pm
Print Post  
Bob Hoyt has done one in 50-70 and two in 50-90 with fast turn-around time.
  
John Rigby
Back to top
 
IP Logged
 
Green_Frog
Frequent Elocutionist
*****
Offline


"It ain't easy being green"
ASSRA Life #281

Posts: 4164
Location: Lynchburg, VA
Joined: Apr 18th, 2004
Re: Who rebores barrels to 50 caliber
Reply #6 - Jun 28th, 2021 at 2:31pm
Print Post  
John Rigby wrote on Jun 24th, 2021 at 12:37pm:
Bob Hoyt has done one in 50-70 and two in 50-90 with fast turn-around time. 


Mr Hoyt is held in high regard within the North-South Skirmish community, and if he can provide the twist rate you need he should be a serious choice.  In N-SSA there are a lot of barrels in fifty caliber or bigger, so he certainly has the experience. 

Froggie
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.2618 seconds.