ASSRA Forum - Cimarron Arms (Uberti) High Wall Trigger Swap

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Cimarron Arms (Uberti) High Wall Trigger Swap

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Cimarron Arms (Uberti) High Wall Trigger Swap (Read 2586 times)

Nimrod Junior Member Offline O.S.O.K. Posts: 62 Location: Eastern New Mexico Joined: Aug 8^th, 2013	Cimarron Arms (Uberti) High Wall Trigger Swap Apr 28^th, 2021 at 7:53pm	Print Post
	Cimarron Firearms sells a double set trigger group for the High Wall. Can anyone tell me if it can be swapped out for the single standard trigger without machine work on the receiver? Thanks

	If you need more than one shot, you need more practice!
	IP Logged

Brian Junior Member Offline Posts: 90 Joined: Feb 19^th, 2014	Re: Cimarron Arms (Uberti) High Wall Trigger Swap Reply #1 - Apr 30^th, 2021 at 9:59am	Print Post
	Yes it can, it is a different lower tang, finger lever, sear knock off, and hammer w/ fly. NO machine work


	IP Logged

Brian Junior Member Offline Posts: 90 Joined: Feb 19^th, 2014	Re: Cimarron Arms (Uberti) High Wall Trigger Swap Reply #2 - Apr 30^th, 2021 at 11:13am	Print Post
	Just remembered, I believe the double set is only offered for a pistol grip stock, so the lower tang would be a problem if you have a straight stock.


	IP Logged

Nimrod Junior Member Offline O.S.O.K. Posts: 62 Location: Eastern New Mexico Joined: Aug 8^th, 2013	Re: Cimarron Arms (Uberti) High Wall Trigger Swap Reply #3 - Apr 30^th, 2021 at 5:32pm	Print Post
	Thanks, Brian. I do have the straight stock, but might give it a try and see if I can straighten the lower tang.

	If you need more than one shot, you need more practice!
	IP Logged

John Boy Ex Member	Re: Cimarron Arms (Uberti) High Wall Trigger Swap Reply #4 - Apr 30^th, 2021 at 5:36pm	Print Post
	ThTx ... Curious, why do want only a standard single trigger? And with one, what trigger pull ounces are you going to reduce it to?


	IP Logged

Nimrod Junior Member Offline O.S.O.K. Posts: 62 Location: Eastern New Mexico Joined: Aug 8^th, 2013	Re: Cimarron Arms (Uberti) High Wall Trigger Swap Reply #5 - Apr 30^th, 2021 at 5:39pm	Print Post
	That's backwards, John Boy. I have the single standard trigger, I want the double set triggers.

	If you need more than one shot, you need more practice!
	IP Logged

John Boy Ex Member	Re: Cimarron Arms (Uberti) High Wall Trigger Swap Reply #6 - Apr 30^th, 2021 at 5:41pm	Print Post
	Sorry, missed it in your post ...


	IP Logged

Nimrod Junior Member Offline O.S.O.K. Posts: 62 Location: Eastern New Mexico Joined: Aug 8^th, 2013	Re: Cimarron Arms (Uberti) High Wall Trigger Swap Reply #7 - Apr 30^th, 2021 at 5:41pm	Print Post
	My rifle is at 3.25 pounds right now. I would like to get it down to two pounds. That is where I have my more modern 1,000 yd rifles. I would like to get my high wall and my low wall down to this.

	If you need more than one shot, you need more practice!
	IP Logged

MartiniBelgian Frequent Elocutionist Offline Posts: 1734 Location: Aarschot Joined: Jun 7^th, 2004	Re: Cimarron Arms (Uberti) High Wall Trigger Swap Reply #8 - May 1^st, 2021 at 2:47am	Print Post
	Seems like you could get that standard trigger down to about 2.5 with some trigger / spring work. I know a friend got his down to that, possibly even less. That would save you a lot of money...


	WWW IP Logged

bohemianway Oldtimer Offline Posts: 706 Location: Andover, MN Joined: Apr 16^th, 2004	Re: Cimarron Arms (Uberti) High Wall Trigger Swap Reply #9 - May 2^nd, 2021 at 9:44pm	Print Post
	And, DSTs have a noticeable added lock time.


	GTalk IP Logged

debass Participating Member Offline Posts: 17 Location: northern California Joined: Nov 23^rd, 2008	Re: Cimarron Arms (Uberti) High Wall Trigger Swap Reply #10 - May 8^th, 2021 at 8:43pm	Print Post
	Well, if the single set trigger is like mine, it's a piece of crap. The double set interchanges easily, although I'm not sure why I needed all the extra parts.


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 18055 Location: Oregon Joined: Feb 2^nd, 2009	Re: Cimarron Arms (Uberti) High Wall Trigger Swap Reply #11 - May 9^th, 2021 at 11:05am	Print Post
	Didn't se ant mention that he has a single set trigger; just a single trigger. Not sure the curved tang for the DST could be straightened and not mess up geometry, or at the least mess up the finish.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›