Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic 33-47, 33-40, Reamer specifications? (Read 1427 times)
bohemianway
Oldtimer
*****
Offline



Posts: 706
Location: Andover, MN
Joined: Apr 16th, 2004
33-47, 33-40, Reamer specifications?
Apr 24th, 2021 at 7:22pm
Print Post  
Gents,

I have a couple of 33 caliber projects (Ballard Pacific based, and possibly CPA) using some GM barrels I have (#4, 12" twist). Breach seating and hoping for fixed also for offhand schuetzen (don't really care for bench).

Question is there a known good reamer profile out there? Or, are there some modification to the standard for lead, neck, etc. due to more recent experience in 33 or similar calibers?

Before I buy a new reamer, I could also send to CPA who I believe has a reamer. Or, if someone has one.

Anyway, comments welcome.

Thank you,
Charles
  
Back to top
GTalk  
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10625
Joined: Apr 8th, 2009
Re: 33-47, 33-40, Reamer specifications?
Reply #1 - Apr 25th, 2021 at 10:24am
Print Post  
The 33-40 simply uses a basic unmodified 32-40 case. The 33-47 is a 32-40 case blown out to 33-47. CPA has both so you have to be careful about which one you request. A 33 bullet would not fit into a 32-40 case nor would it fit into a breech seater case. That is why you would want to make it clear that you want a 33-47 and not a 33-40.
  

" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10625
Joined: Apr 8th, 2009
Re: 33-47, 33-40, Reamer specifications?
Reply #2 - Apr 25th, 2021 at 11:08am
Print Post  
If you have the 33 bullet that you want to use. I would design the reamer especially around it and in that regard Dave Manson / Manson Reamers could be a big help. When I designed my own the lead angle, freebore, its length and diameter where all specific for the bullet I chose to use so the bullet is now a perfect fit.
  

" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
bohemianway
Oldtimer
*****
Offline



Posts: 706
Location: Andover, MN
Joined: Apr 16th, 2004
Re: 33-47, 33-40, Reamer specifications?
Reply #3 - Apr 25th, 2021 at 2:07pm
Print Post  
At this point I have none of the above and since I would like to try fixed ammo it would force me to a 33-47. Now trying to have it for both fixed and breech may be a pipe dream. Just as a Fixed vs breech seating bullet will be different. Years ago when I was competitive the accuracy difference would have mattered. But now I want to enjoy and don't think fixed ammo will be detrimental to my 210 level scores. Advice always welcome since it has been awhile and I don't want to  by two reamers and two bullet molds.

Thank you,
Charles
  
Back to top
GTalk  
IP Logged
 
Dales
Senior Forum Member
****
Offline



Posts: 321
Location: Western NY
Joined: Oct 21st, 2013
Re: 33-47, 33-40, Reamer specifications?
Reply #4 - Apr 25th, 2021 at 2:27pm
Print Post  
I have a 33-47 on a Stevens 44 1/2 action and it shoots very well breach seated, sub 1/2" 100yd groups and will also shoot in the 1" range with fixed ammo. Go with the 33-47 and you will be happy just make sure you get a reamer with a good throat angle.

Dales
  
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10625
Joined: Apr 8th, 2009
Re: 33-47, 33-40, Reamer specifications?
Reply #5 - Apr 25th, 2021 at 3:03pm
Print Post  
My Briesen 33-47 was the most accurate and user friendly competitive rifle that I have ever owned to date. Barrel was a 15 twist Breisen left hand twist, bullet a 234 grain Moss Spitzer, load 14.7 grains of H-108 and or AA-9, Rem. 91/2 LR primers and being breech seated. I believe your choice to build a 33-47 for yourself while shooting fixed ammunition is a very wise choice indeed. Unfortunately I cannot be helpful on your reamer design. Shooting fixed while using the 33-47 is something that I have never been personally involved with. But I do believe in order to have a reamer designed it has to revolve the bullet itself. 33 bullet moulds unlike the 32 are extremely hard to come by so the option of trying different bullets is extremely difficult to do. Also when ordering a reamer you should know the bore and groove diameter of the barrel. And I would also highly recommend getting one with removable pilots. What you might have to pay to have a custom reamer made can often times be recouped if deciding to sell it when you are done with it. Or you might have to take a slight lose my custom Manson reamer was 220.00 dollars but it was also exactly to my specs. I have used several made by others and the Manson has been by far the best so far.
  

" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint