ASSRA Forum - Another Striker Action

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Another Striker Action

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1 [2] 3

Very Hot Topic (More than 25 Replies)

Another Striker Action (Read 9085 times)

Jeff_Schultz ASSRA Board Member Offline Posts: 1660 Location: Ransomville, NY Joined: Apr 25^th, 2004	Re: Another Striker Action Reply #15 - Apr 5^th, 2021 at 3:35pm	Print Post
	That's beautiful work Chuck! Someone like you needs to design us a falling block benchrest action that will take a Jewell trigger . It doesn't matter what it looks like.

	"We have met the enemy and he is us." Pogo “There is no situation so bad that it cannot be made worse." Confidence- The feeling you get before you fully understand the situation.
	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: Another Striker Action Reply #16 - Apr 5^th, 2021 at 3:51pm	Print Post
	Makes one wonder how hard it would be to convert a FBW's ModelJ to use a Jewell trigger? Probably one of the best and simplistic actions to be made and they already had a nice trigger that could easily be improved on with a little stoning and also very easy to adjust for the price. Last ones we bought from Leo a few years back were still only 400.00ea. and already blued.

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

Jeff_Schultz ASSRA Board Member Offline Posts: 1660 Location: Ransomville, NY Joined: Apr 25^th, 2004	Re: Another Striker Action Reply #17 - Apr 5^th, 2021 at 3:59pm	Print Post
	JLouis wrote on Apr 5^th, 2021 at 3:51pm: Makes one wonder how hard it would be to convert a FBW's ModelJ to use a Jewell trigger? Probably one of the best and simplistic actions to be made and they already had a nice trigger that could easily be improved on with a little stoning and also very easy to adjust for the price. Last ones we bought from Leo a few years back were still only 400.00ea. and already blued. Unless you're Rube Goldberg, it would be impossible!

	"We have met the enemy and he is us." Pogo “There is no situation so bad that it cannot be made worse." Confidence- The feeling you get before you fully understand the situation.
	IP Logged

gwahir Senior Forum Member Offline Ve gets too soon olt und too late shmart. Posts: 456 Location: montana Joined: Dec 31^st, 2005	Re: Another Striker Action Reply #18 - Apr 7^th, 2021 at 12:10am	Print Post
	A most interesting post! Thank you, Chuck. Trigger.. I like the double set. Did you make this one? I made up the double set triggers for my Hauck so am aware of space limitations that you faced.


	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: Another Striker Action Reply #19 - Apr 7^th, 2021 at 1:27pm	Print Post
	If there is a will there is always a way and if anyone has the talent to do it. It would probably be someone as talented as Steve Durren and I am in no way that same type of talented individual myself.

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 12358 Location: Why, out West of course Joined: May 29^th, 2006	Re: Another Striker Action Reply #20 - Apr 7^th, 2021 at 3:34pm	Print Post
	Looks good Chuck. You know, when you make something, you should make two. One for me and one for you. I like those double sets.

	A blind squirrel runs into a tree every once in a while.
	IP Logged

gwahir Senior Forum Member Offline Ve gets too soon olt und too late shmart. Posts: 456 Location: montana Joined: Dec 31^st, 2005	Re: Another Striker Action Reply #21 - Apr 11^th, 2021 at 2:29pm	Print Post
	Chuck, when you harden the action, do you make the block and the receiver the same hardness?


	IP Logged

Chuckster Frequent Elocutionist Offline Posts: 2312 Location: Colorado Joined: May 15^th, 2008	Re: Another Striker Action Reply #22 - Apr 11^th, 2021 at 10:47pm	Print Post
	Good question. Receiver and breech block made of 8620 (low carbon, alloy) steel which does not harden but casehardens well. Parts will be color casehardened and the hardness of the case will be important. Internal parts are casehardened with Kasenit or heat treated as required. Chuck


	IP Logged

Chuckster Frequent Elocutionist Offline Posts: 2312 Location: Colorado Joined: May 15^th, 2008	Re: Another Striker Action Reply #23 - Apr 12^th, 2021 at 2:35pm	Print Post
	Getting some questions on how the action works. Picture may help. Roller on the link cocks about 3/4. Sear catches on closing and completes cocking. Chuck


	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: Another Striker Action Reply #24 - Apr 12^th, 2021 at 2:59pm	Print Post
	Joe it should actually be three one for you and one for me. Very nice design and thanks for the drawing Chuck.

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 12358 Location: Why, out West of course Joined: May 29^th, 2006	Re: Another Striker Action Reply #25 - Apr 12^th, 2021 at 4:34pm	Print Post
	You hornin in on my dib?

	A blind squirrel runs into a tree every once in a while.
	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: Another Striker Action Reply #26 - Apr 12^th, 2021 at 7:20pm	Print Post
	Yep never hurts to try! Joe

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

gwahir Senior Forum Member Offline Ve gets too soon olt und too late shmart. Posts: 456 Location: montana Joined: Dec 31^st, 2005	Re: Another Striker Action Reply #27 - Apr 12^th, 2021 at 10:12pm	Print Post
	Chuck; most excellent drawing! The stop spring contacts the lever? The Hauck needs something like this! I am thinking!


	IP Logged

Chuckster Frequent Elocutionist Offline Posts: 2312 Location: Colorado Joined: May 15^th, 2008	Re: Another Striker Action Reply #28 - Apr 13^th, 2021 at 4:09pm	Print Post
	Stop spring just contacts the lever to hold position for loading. Compress to extract. Plan "B" after Plan "A" did not work. Plan "A" was a step on the cocking piece. Chuck
	« Last Edit: Apr 13^th, 2021 at 4:15pm by Chuckster »

	IP Logged

gwahir Senior Forum Member Offline Ve gets too soon olt und too late shmart. Posts: 456 Location: montana Joined: Dec 31^st, 2005	Re: Another Striker Action Reply #29 - Apr 13^th, 2021 at 10:15pm	Print Post
	OK, Chuck. I see it now. The lever contacts the end of the spring. I had assumed it contacted the side... The Hauck has a forend hanger screw in that position which could take on added responsibility. The spring would have to contact the breech block rather than the lever (plan 'A') in this case. It would be well worth the effort. Thanks!


	IP Logged

Page Index Toggle

Pages: 1 [2] 3

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.1699 seconds.