ASSRA Forum › General › Gunsmithing Single Shot Rifles › Did someone offer their services?
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Did someone offer their services? (Read 1249 times)
JBenham
Participating Member
*
Offline



Posts: 41
Joined: Feb 17th, 2021
Did someone offer their services?
Mar 17th, 2021 at 8:28pm
Print Post  
Did someone in here offer to fix my hammer and trigger issues for a reasonable fee?  Or was that somewhere else?   
I am open to offers and suggestions.  I know the half cock notch needs some welding and reshaping.  I can have it TIG welded locally but beyond that its a gamble as I have no idea who in my area to trust with this thing.  I figure someone in here who knows these old guns and is familiar with their idiosyncrasies might be my best choice. 
Thank you.
  
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10625
Joined: Apr 8th, 2009
Re: Did someone offer their services?
Reply #1 - Mar 18th, 2021 at 10:57am
Print Post  
By chance have you checked with Gail at CPA to see if she has a new hammer in stock. I know they used sell new parts for original rifles and they might still do. And not all of them were at times always listed on their Web. site. Several years back a friend bought a new original breech block from Paul as he was having them made at the time by someone outside his own shop. 
  
" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
JBenham
Participating Member
*
Offline



Posts: 41
Joined: Feb 17th, 2021
Re: Did someone offer their services?
Reply #2 - Mar 21st, 2021 at 9:23am
Print Post  
I have not checked with Gail for a hammer but I have been buying lots of small parts as of late from CPA.  I will call them and ask.
  
Back to top
 
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2942
Location: Southern NJ
Joined: Aug 1st, 2010
Re: Did someone offer their services?
Reply #3 - Mar 21st, 2021 at 9:50am
Print Post  
You are talking CPA, so am guessing if you are talking a CPA, 44 1/2 or 44 or what? Would be helpful to know.
  
Glenn - Stevens 044 1/2, Bartlein SS 5R barrel in 22LR
Back to top
GTalk  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.1151 seconds.