Page Index Toggle Pages: [1] 2  Send TopicPrint
Very Hot Topic (More than 25 Replies) 33 Winchester anyone? (Read 9913 times)
derrickman
Junior Member
**
Offline



Posts: 87
Joined: Dec 2nd, 2015
33 Winchester anyone?
Oct 7th, 2020 at 8:47am
Print Post  
Looking for hunting loads for this round in a single shot rifle.
Either cast or jacketed bullets.
Thanks!
  
Back to top
 
IP Logged
 
JSB30
Senior Forum Member
****
Offline



Posts: 393
Location: Missouri
Joined: Apr 30th, 2011
Re: 33 Winchester anyone?
Reply #1 - Oct 7th, 2020 at 12:38pm
Print Post  
Middle of range 200 G jacketed
32 gr  4198
38 3031
41 4895
  
Back to top
 
IP Logged
 
Slow Lazy Dog
Participating Member
*
Offline



Posts: 49
Location: Abilene, Texas
Joined: Feb 11th, 2018
Re: 33 Winchester anyone?
Reply #2 - Dec 17th, 2020 at 1:19pm
Print Post  
I shoot a 200 grain FNGC cast bullet over 35.5 grains of imr 4895 in my 86 Winchester. Deadly on hogs.
  
Back to top
 
IP Logged
 
Bulseyetom
Oldtimer
*****
Offline



Posts: 946
Location: Santa Maria, Ca
Joined: Oct 31st, 2010
Re: 33 Winchester anyone?
Reply #3 - Dec 17th, 2020 at 1:59pm
Print Post  
Fresh off the latest 1940's Ideal Handbook.  Tom
  
Back to top
Twitter  
IP Logged
 
xtimberman
Full Member
***
Offline



Posts: 172
Location: N. Texas
Joined: Mar 26th, 2010
Re: 33 Winchester anyone?
Reply #4 - Dec 24th, 2020 at 12:29pm
Print Post  
I've brought lots of whitetail deer to bag with a .33WCF '86 Win. - always using the now-discontinued Hornady 200gr. JFP.

200gr. Hornady FP; formed R-P .45-70 brass; Rem.9 1/2; 40.0gr. IMR-3031; OAL 2.795" - 2112fps ave vel. (24" bbl.)

I'm looking forward to trying out the relatively "new" Hornady rubber tip .200gr. FTX bullets on game in this rifle. They shoot to almost the same POI as the JFPs at 100 yds. and have a noticeably flatter trajectory at 200 yds - (but haven't tried them beyond that). I use the same components and the same 40.0gr. charge of IMR-3031...but seat the FTX to a cartridge OAL of 2.690" - ave. MV 2187fps.

I believe Hornady still lists loads for the .33WCF and their 200gr. bullets in their comprehensive reloading manual, with recent manuals substituting the FTX for the JFP.
  
Back to top
 
IP Logged
 
ballardhepburnmich
ASSRA Board Member
*****
Offline



Posts: 598
Location: Scotts,mi.
Joined: May 20th, 2015
Re: 33 Winchester anyone?
Reply #5 - Dec 24th, 2020 at 11:54pm
Print Post  
I've killed a few white tails with a. 33, it's a little bit overkill but not to bad. 
Lee Gibbs pres.ASSRA
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11331
Location: Why, out West of course
Joined: May 29th, 2006
Re: 33 Winchester anyone?
Reply #6 - Dec 25th, 2020 at 4:52pm
Print Post  
I had a 1886 Winchester in .33 Winchester for a couple weeks. Round barrel short magazine. Beautiful rifle in mint condition. I got talked into selling it. Money talks. 
  

A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
xtimberman
Full Member
***
Offline



Posts: 172
Location: N. Texas
Joined: Mar 26th, 2010
Re: 33 Winchester anyone?
Reply #7 - Dec 25th, 2020 at 5:36pm
Print Post  
westerner wrote on Dec 25th, 2020 at 4:52pm:
I had a 1886 Winchester in .33 Winchester for a couple weeks. Round barrel short magazine. Beautiful rifle in mint condition. I got talked into selling it. Money talks. 

Those lightweight rifles in that configuration chambered for .33WCF used to be "cheap". In the 1970s or earlier, they could be bought for little more than a nice '94 in .30WCF because few folks were interested in chasing down rounds for the obsolete cartridge or forming brass themselves. I bought mine in the early 1970s strictly because it was the only M-1886 I could afford AND it came with case forming dies. The '86 .33s still command much less than all other '86s chambered for any of the other cartridges. I love the .33WCF. It looks like a super-duper .30-30 - plus it hits like a sledge hammer and penetrates deep.  Smiley
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11331
Location: Why, out West of course
Joined: May 29th, 2006
Re: 33 Winchester anyone?
Reply #8 - Dec 25th, 2020 at 9:31pm
Print Post  
xtimberman wrote on Dec 25th, 2020 at 5:36pm:
westerner wrote on Dec 25th, 2020 at 4:52pm:
I had a 1886 Winchester in .33 Winchester for a couple weeks. Round barrel short magazine. Beautiful rifle in mint condition. I got talked into selling it. Money talks. 

Those lightweight rifles in that configuration chambered for .33WCF used to be "cheap". In the 1970s or earlier, they could be bought for little more than a nice '94 in .30WCF because few folks were interested in chasing down rounds for the obsolete cartridge or forming brass themselves. I bought mine in the early 1970s strictly because it was the only M-1886 I could afford AND it came with case forming dies. The '86 .33s still command much less than all other '86s chambered for any of the other cartridges. I love the .33WCF. It looks like a super-duper .30-30 - plus it hits like a sledge hammer and penetrates deep.  Smiley


Your post jogged my memory. Thats it in a nutshell. I remember wishing it was a pistol grip long magazine 45-90. I'd still have it.
  

A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 15771
Location: Oregon
Joined: Feb 2nd, 2009
Re: 33 Winchester anyone?
Reply #9 - Dec 31st, 2020 at 10:44am
Print Post  
Had a couple 1895 Marlins in .33 Win. and same thing for them too. The old 1895 Marlins got such high prices I didn't want to spring for one. But in .33 Win. they were almost a bargain price. Cheap enough that one of mine was a takedown version, and was less money than any .45-70 solid frame 1895 I'd seen for sale.
I never hunted with mine, and both got sold to fund the Ballard fever. But I love the cartridge, and think it's one of the best ever. My feeling was the .348 Win killed the .33 Win. back then. Once it hit the market nobody wanted a .33 anymore, even when ammo was available.
  

(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
KWK
Senior Forum Member
****
Offline



Posts: 398
Location: USA
Joined: Jul 12th, 2004
Re: 33 Winchester anyone?
Reply #10 - Jan 1st, 2021 at 12:13am
Print Post  
Quote:
It looks like a super-duper .30-30...


It is a super 30 WCF. Same bullet SD, same fps, but 20% more mass.

Like others here, I've always thought it "looked right" even if I couldn't explain why. Dave Higginbotham offered to do one of his rolling blocks in it, but I went with the more common 30-40. I figured I'd avoid case forming, but Krag brass has been scarce the last few years (but I have a good supply on hand).
  

Karl
Back to top
WWW  
IP Logged
 
OLD TUCK
Senior Forum Member
****
Offline



Posts: 469
Location: Middleborough MA
Joined: Oct 5th, 2017
Re: 33 Winchester anyone?
Reply #11 - Jan 22nd, 2021 at 3:47pm
Print Post  
When I first started hunting deer in Maine 1964 I hunted with a pre 64 M70 in .257 Roberts for two years. Same story both years clean shots, they were dead but just did not know it. Had to trail them and did get them but was unhappy because I did not consider them CLEAN Kills. So went home and spoke to a Gunsmith and told him I wanted a Rifle that would be a clean humane Hunting rifle. Pulled out an 86 Winchester he had in .33 Winchester with a barrel he had made himself. Chased down dies and Bullets .200 Gr. round nose. It shot really good, since that time I have taken 9 Deer with it none ever got a leg back under them. Found the 3031 and 4064 worked fine no matter which was used. still have the .257 Roberts and the .33 Winchester, just don't want to part with either
of them. Hunting should be a Humane activity with no significant suffering on the 
Game side. Now I have them coming into my back field to graze under Pear tree's. I just enjoy seeing them there. No desire to hunt that way. Well good luck to all in the future. Regards FITZ OLDTUCK. Smiley
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11331
Location: Why, out West of course
Joined: May 29th, 2006
Re: 33 Winchester anyone?
Reply #12 - Jan 22nd, 2021 at 4:23pm
Print Post  
I took a half dozen deer with a 270W. 130 grain bullets. One shot per animal.
  

A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
derrickman
Junior Member
**
Offline



Posts: 87
Joined: Dec 2nd, 2015
Re: 33 Winchester anyone?
Reply #13 - Jan 26th, 2021 at 9:50am
Print Post  
My 33 Win high wall build is out for blueing. Found a decent stick of lumber that whittled out to a decent stock.
« Last Edit: Jan 26th, 2021 at 9:59am by derrickman »  
Back to top
 
IP Logged
 
MrTipUp
Frequent Elocutionist
*****
Offline


Quality is to a product
what character is to
a man

Posts: 1301
Location: Indiana
Joined: Feb 19th, 2020
Re: 33 Winchester anyone?
Reply #14 - Jan 26th, 2021 at 10:38am
Print Post  
Really lovely stock work, derrickman!

Bill Lawrence
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: [1] 2 
Send TopicPrint