(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Neck tension (Read 1506 times)
jagfolks
Junior Member
**
Offline



Posts: 61
Location: Plymouth, Mi.
Joined: Dec 16th, 2010
Neck tension
Oct 2nd, 2020 at 10:08pm
Print Post  
I've been shooting Dave Bennett's 200 gr.321 bullets in my CPA breech loading with a plugged case. I also have 100 of his 190 gr .322 bullets that I cannot breech seat using the above method. I find that these bullets and be pushed by hand into the unsized cases and question is will the lack of neck tension affect accuracy?
  
Back to top
 
IP Logged
 
Cbashooter
Frequent Elocutionist
*****
Offline



Posts: 1570
Location: Eastern Wa.
Joined: Mar 31st, 2018
Re: Neck tension
Reply #1 - Oct 2nd, 2020 at 10:18pm
Print Post  
The problem i had "finger seating " in the case is the engagement into the rifling varied.i didnt get good accuracy but you may,you have to try it.my buddy breech seats a big  bullet partially and the neck slides around the bullet base and shoots fine.
  
Back to top
 
IP Logged
 
jagfolks
Junior Member
**
Offline



Posts: 61
Location: Plymouth, Mi.
Joined: Dec 16th, 2010
Re: Neck tension
Reply #2 - Oct 2nd, 2020 at 11:18pm
Print Post  
Thanks! I'll find out tomorrow.
  
Back to top
 
IP Logged
 
MartiniBelgian
Frequent Elocutionist
*****
Offline



Posts: 1674
Location: Aarschot
Joined: Jun 7th, 2004
Re: Neck tension
Reply #3 - Oct 3rd, 2020 at 2:07am
Print Post  
Been a while I did it with my 32-20 - and with BP, but yes, it will work.  I will add that I seated the bullet with a plugged case, and the case neck slides up around the bullet.
  
Back to top
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.6611 seconds.