ASSRA Forum › General › Reloading the Single Shot Rifle › 4759 conversation to 4227 or 300-MP
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) 4759 conversation to 4227 or 300-MP (Read 4777 times)
MI-shooter
Moderator
*****
Offline



Posts: 698
Location: SE Michigan
Joined: Apr 18th, 2004
Re: 4759 conversation to 4227 or 300-MP
Reply #15 - Sep 1st, 2020 at 8:15pm
Print Post  
Fell to bottom of the list. Happens sometimes.
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11462
Location: Why, out West of course
Joined: May 29th, 2006
Re: 4759 conversation to 4227 or 300-MP
Reply #16 - Sep 1st, 2020 at 8:55pm
Print Post  
beltfed wrote on Sep 1st, 2020 at 2:44pm:
Westerner, 
Did you also set back the barrel on that 30 40
to allow for the reduced rim thickness/increased
headspace? 
Or did you re- fire form the brass to headspace on the 
neck?
beltfed/arnie


No neck on the case just a straight taper.  30-40 head spaces on the rim. Did not set the barrel back. Set head space with the chamber reamer. 
  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.9361 seconds.