ASSRA Forum › General › Reloading the Single Shot Rifle › Reloading a sharps 45-110
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Reloading a sharps 45-110 (Read 1392 times)
daveyboy60
Newbie
*
Offline



Posts: 2
Joined: Aug 25th, 2020
Reloading a sharps 45-110
Aug 26th, 2020 at 2:19pm
Print Post  
Hey folks, new here, I was reloading 45-110 and while resizing I got a few resizing dents in my casings, I guess too much lube. Will they hurt anything or will they fire for out.?
  
Back to top
 
IP Logged
 
Jeff Houck
Junior Member
**
Offline



Posts: 78
Location: Pocatello
Joined: Jan 11th, 2014
Re: Reloading a sharps 45-110
Reply #1 - Aug 26th, 2020 at 2:29pm
Print Post  
They'll blow out a little at a time as you shoot. If you are using black powder the pressure is low enough that it will usually take a few firings to fully blow out.
  
Jeff Houck
Back to top
YIMAIM  
IP Logged
 
calledflyer
Frequent Elocutionist
*****
Offline



Posts: 3561
Joined: Mar 9th, 2015
Re: Reloading a sharps 45-110
Reply #2 - Aug 26th, 2020 at 3:12pm
Print Post  
And if you are loading that case with any powder that will blow out in one shot you wont want to do the second case. Learn from your mistake and good luck.
  
Back to top
 
IP Logged
 
Ranch13
Oldtimer
*****
Offline



Posts: 545
Location: East Central Wy.
Joined: Jan 20th, 2018
Re: Reloading a sharps 45-110
Reply #3 - Aug 26th, 2020 at 6:13pm
Print Post  
Lube dents, cut down on the amount of lube you're putting on the cases.
102 gr.s of 1f behind a 535 gr bullet will iron those out.
  
Back to top
 
IP Logged
 
daveyboy60
Newbie
*
Offline



Posts: 2
Joined: Aug 25th, 2020
Re: Reloading a sharps 45-110
Reply #4 - Aug 27th, 2020 at 6:46pm
Print Post  
Im Loading 95 grains of Swiss 1.5 with a 535grain postell bullet, hopefully it will iron them out.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.2648 seconds.