Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Weihrauch HW52 Tyrolean - Zimmerstutzen (Read 3530 times)
chuckjordan2
Junior Member
**
Offline



Posts: 61
Location: Capital Region
Joined: Mar 18th, 2012
Weihrauch HW52 Tyrolean - Zimmerstutzen
Feb 4th, 2020 at 9:26pm
Print Post  
For your eyes:  Weihrauch HW52 Tyro Zimmerstutzen
- Set (DST) triggers!
- 4mm (flobert) - about 10" of barrel, the rest is a hollow tube
- Breech/bolt face can accommodate a .22lr conversion (if one is inclined)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

It's been stripped down, cleaned, lubed (I have a couple others if this model, I know how to disassemble/assemble)

(You need to Login or Register to view media files and links)




  
Back to top
 
IP Logged
 
JägerWilhelm
Full Member
***
Offline


ASSRA #8407

Posts: 207
Location: Central Pennsylvania
Joined: Sep 13th, 2015
Re: Weihrauch HW52 Tyrolean - Zimmerstutzen
Reply #1 - Feb 4th, 2020 at 9:42pm
Print Post  
Great rifle! Does it fire the Kurz or Lang 4mm round?

I recently picked up a HW55 Tyrolean air rifle.
  

NRA Life, GGCA Director, OVMS Life, FDHAS Life

Mit Schützengruß,
Willi
Back to top
 
IP Logged
 
Bill Lawrence
Frequent Elocutionist
*****
Offline



Posts: 1037
Joined: Mar 17th, 2014
Re: Weihrauch HW52 Tyrolean - Zimmerstutzen
Reply #2 - Feb 4th, 2020 at 11:33pm
Print Post  
Is the forearm hanger hollow, perhaps so weights can be added?

Bill Lawence
  
Back to top
 
IP Logged
 
jimmy
Senior Forum Member
****
Offline


Now available in Oklahoma.

Posts: 299
Location: Skiatook
Joined: May 12th, 2009
Re: Weihrauch HW52 Tyrolean - Zimmerstutzen
Reply #3 - Feb 5th, 2020 at 6:20pm
Print Post  
Awesome.  Cheesy
  
Back to top
 
IP Logged
 
chuckjordan2
Junior Member
**
Offline



Posts: 61
Location: Capital Region
Joined: Mar 18th, 2012
Re: Weihrauch HW52 Tyrolean - Zimmerstutzen
Reply #4 - Feb 9th, 2020 at 4:17pm
Print Post  

I've never loaded either the short or long 4mm cartridge.   My original intent was to convert this into an 8.15x46R, however, the receiver walls are too thin.    Converting to .22lr can be accomplished and the falling block is setup for that.    Only my machinist moved away this year.   Sadly, I'll be selling it.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint