ASSRA Forum › General › Reloading the Single Shot Rifle › Mould for 32-20 wcf .313
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Mould for 32-20 wcf .313 (Read 1731 times)
plumloco
Full Member
***
Offline



Posts: 141
Location: Manassas ,VA
Joined: May 20th, 2004
Mould for 32-20 wcf .313
Jun 8th, 2018 at 8:04am
Print Post  
Looking for direction for a breech seating bullet for the original bore dims. I have a one degree throat (.316) for breech seating. Have a hard time finding a mould. Any ideas?   
Thanks  Plumloco
  
Back to top
 
IP Logged
 
Premod70
Oldtimer
*****
Offline



Posts: 873
Location: North Carolina
Joined: Jan 16th, 2016
Re: Mould for 32-20 wcf .313
Reply #1 - Jun 8th, 2018 at 10:31am
Print Post  
Contact Accurate Molds, he can make you any diameter or taper that you chose.
  
Back to top
 
IP Logged
 
frnkeore
Frequent Elocutionist
*****
Offline



Posts: 7652
Location: Central Point, OR 97502
Joined: Jun 16th, 2010
Re: Mould for 32-20 wcf .313
Reply #2 - Jun 8th, 2018 at 12:27pm
Print Post  
Is this a original rifle with the original twist rate?

Frank
  
ASSRA Member #696, ISSA Member #339
Back to top
YIMAIM  
IP Logged
 
plumloco
Full Member
***
Offline



Posts: 141
Location: Manassas ,VA
Joined: May 20th, 2004
Re: Mould for 32-20 wcf .313
Reply #3 - Jun 8th, 2018 at 2:12pm
Print Post  
Thanks for the replies. Original action. New barrel. 1-10"
Accurate doesn't make pointed bullets. Looking for a Darr type bullet.  Jesse
  
Back to top
 
IP Logged
 
RSW
Frequent Elocutionist
*****
Offline



Posts: 1298
Location: Arizona
Joined: Sep 8th, 2006
Re: Mould for 32-20 wcf .313
Reply #4 - Jun 8th, 2018 at 3:11pm
Print Post  
Contact Steve Brooks at Tru-Bore Moulds. He has made a couple of dandy  .32 cal spitzer molds for me. Let him know the bullet length, bearing band diameters and lead alloy you intend to use. He usually delivers in less than 4 weeks.
  
Randy W
ASSRA 10211  -  ISSA 125
There are indeed two Americas. Simply put, it is not the haves and have nots. The two Americans are in reality divided into those who do and those who don't.
Back to top
GTalk  
IP Logged
 
frnkeore
Frequent Elocutionist
*****
Offline



Posts: 7652
Location: Central Point, OR 97502
Joined: Jun 16th, 2010
Re: Mould for 32-20 wcf .313
Reply #5 - Jun 8th, 2018 at 10:04pm
Print Post  
Here is one that might work for you and a second one that will work if, you open the base band to .316/.317. They are only $79, too.

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)

Frank
  
ASSRA Member #696, ISSA Member #339
Back to top
YIMAIM  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.5439 seconds.