ASSRA Forum › General › Reloading the Single Shot Rifle › WTB 44-90 brass
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic WTB 44-90 brass (Read 1151 times)
artpro
Newbie
*
Offline



Posts: 1
Joined: Nov 23rd, 2017
WTB 44-90 brass
Feb 23rd, 2018 at 1:27pm
Print Post  
Hi. I'm wanting a couple pieces of 44-90 brass to try in my 43 Spanish chambered roller. As is, the freebore is excessively looong.
Art, Oregon

arttriad@aol.com
  
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Online



Posts: 4478
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: WTB 44-90 brass
Reply #1 - Feb 23rd, 2018 at 1:38pm
Print Post  
Art, it must be a M1879 Argentine rifle. Mine was like that - tight chamber long freebore. I had Bernie Rowles at Old West Bullet Molds make me a bullet that had a long body with a fat nose that could touch the lands while still seated in the case.
  
Back to top
 
IP Logged
 
corerftech
Senior Forum Member
****
Offline



Posts: 263
Location: Memphis, TN
Joined: Mar 3rd, 2014
Re: WTB 44-90 brass
Reply #2 - Feb 23rd, 2018 at 9:19pm
Print Post  
44-90 is the answer. 
I use it to make really long necked 43! 
BACO usually has the stuff in stock.
Get the thin rim and headspace on shoulder after fireform.
Then never look back and is typical GG Lyman fodder for molds.

Mike
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.6076 seconds.