ASSRA Forum › General › Reloading the Single Shot Rifle › Anybody shooting .25rf Stevens?
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 ... 5 6 [7] 8 9 ... 17 Send TopicPrint
Very Hot Topic (More than 25 Replies) Anybody shooting .25rf Stevens? (Read 45963 times)
ndnchf
Frequent Elocutionist
*****
Offline



Posts: 1067
Joined: Mar 6th, 2014
Re: Anybody shooting .25rf Stevens?
Reply #90 - Sep 21st, 2021 at 6:10pm
Print Post  
Following USCRA112's excellent diagram, I made the .25 Stevens seater parts for a Lee Universal Expander Die (UED) body. It works perfectly!  Thanks for taking the time to design, draw and share it.

These Lee UEDs are really just flaring dies. I must have at least 15 of them, but only one or two are used for flaring. For all the others, I've made custom expander plugs or neck size bushings. This is the first bullet seater I've made out of one. They are inexpensive and perhaps Lee's best kept secret.
  
Back to top
 
IP Logged
 
uscra112
Frequent Elocutionist
*****
Offline



Posts: 4079
Location: Switzerland of Ohio
Joined: May 7th, 2007
Re: Anybody shooting .25rf Stevens?
Reply #91 - Sep 21st, 2021 at 6:26pm
Print Post  
We need somebody with access to a CNC lathe to whip up a batch of these.  The only commercial die that even comes close is the .25-20 WCF, and it is a pain to use.
  
<div class=
Back to top
 
IP Logged
 
ndnchf
Frequent Elocutionist
*****
Offline



Posts: 1067
Joined: Mar 6th, 2014
Re: Anybody shooting .25rf Stevens?
Reply #92 - Sep 21st, 2021 at 6:58pm
Print Post  
That would be nice, but its not me. My lathe is 75 years old and I'm no machinist, just a tinkerer. It takes me 4 times as long to make something than a real machinst with a modern machine shop.
  
Back to top
 
IP Logged
 
Sure shot
Oldtimer
*****
Offline



Posts: 913
Location: East central Iowa
Joined: Jun 22nd, 2020
Re: Anybody shooting .25rf Stevens?
Reply #93 - Sep 21st, 2021 at 6:59pm
Print Post  
uscra112 wrote on Sep 21st, 2021 at 6:26pm:
We need somebody with access to a CNC lathe to whip up a batch of these.  The only commercial die that even comes close is the .25-20 WCF, and it is a pain to use. 



I would buy one.
  
Back to top
 
IP Logged
 
Grumpy gumpy
Full Member
***
Offline



Posts: 214
Location: australia
Joined: Jul 6th, 2016
Re: Anybody shooting .25rf Stevens?
Reply #94 - Sep 21st, 2021 at 7:30pm
Print Post  
Just wondering where the seater diagram is?  Would like to have a look at it.
Gumpy
  
Back to top
 
IP Logged
 
uscra112
Frequent Elocutionist
*****
Offline



Posts: 4079
Location: Switzerland of Ohio
Joined: May 7th, 2007
Re: Anybody shooting .25rf Stevens?
Reply #95 - Sep 21st, 2021 at 7:50pm
Print Post  
Just shoot a p/m with you regular email addy and I'll send it along.  (As a .pdf file, so you won't need AutoCAD.)
  
<div class=
Back to top
 
IP Logged
 
uscra112
Frequent Elocutionist
*****
Offline



Posts: 4079
Location: Switzerland of Ohio
Joined: May 7th, 2007
Re: Anybody shooting .25rf Stevens?
Reply #96 - Sep 21st, 2021 at 7:54pm
Print Post  
Let's see if this comes thru legibly
  
<div class=
Back to top
 
IP Logged
 
uscra112
Frequent Elocutionist
*****
Offline



Posts: 4079
Location: Switzerland of Ohio
Joined: May 7th, 2007
Re: Anybody shooting .25rf Stevens?
Reply #97 - Sep 21st, 2021 at 7:55pm
Print Post  
HA! I guess that's good enough.

I start with 9/16 round which fits the Lee die body.

Lower part has a slight shoulder to keep it from falling right through.   Hard to see until you look closely.

I used a center drill to form the business end of the top punch.  

The rest is obvious.

Phil

n.b. Speedy Metals has 9/16 12L14 round.  It machines well.  Was cheap the last time I bought any.  Shipping was more than the steel.   
« Last Edit: Sep 21st, 2021 at 8:16pm by uscra112 »  
<div class=
Back to top
 
IP Logged
 
uscra112
Frequent Elocutionist
*****
Offline



Posts: 4079
Location: Switzerland of Ohio
Joined: May 7th, 2007
Re: Anybody shooting .25rf Stevens?
Reply #98 - Sep 21st, 2021 at 8:05pm
Print Post  
ndnchf wrote on Sep 21st, 2021 at 6:58pm:
That would be nice, but its not me. My lathe is 75 years old and I'm no machinist, just a tinkerer. It takes me 4 times as long to make something than a real machinst with a modern machine shop.


Me too.  I'm 76 years old, and I think my lathe is older than I am.  War finish South Bend 10 inch Heavy.  Nice lathe but slow.
  
<div class=
Back to top
 
IP Logged
 
ndnchf
Frequent Elocutionist
*****
Offline



Posts: 1067
Joined: Mar 6th, 2014
Re: Anybody shooting .25rf Stevens?
Reply #99 - Sep 21st, 2021 at 8:11pm
Print Post  
Mine's a 12" x 24" Atlas made in 1946. I've had it about 35 years and made hundreds of parts on it. It's like an old friend.
  
Back to top
 
IP Logged
 
Grumpy gumpy
Full Member
***
Offline



Posts: 214
Location: australia
Joined: Jul 6th, 2016
Re: Anybody shooting .25rf Stevens?
Reply #100 - Sep 21st, 2021 at 8:55pm
Print Post  
Ah, thank you for that, and I’d just found the reference in the other thread as well. All good. I’m in oz so I’d need to chase some local suppliers for suitable steels. 
Gumpy
  
Back to top
 
IP Logged
 
ndnchf
Frequent Elocutionist
*****
Offline



Posts: 1067
Joined: Mar 6th, 2014
Re: Anybody shooting .25rf Stevens?
Reply #101 - Sep 26th, 2021 at 2:09pm
Print Post  
Santa came in September! That is in the form of Dellet, who very generously sent my a variety of bullets to try in my .25 Stevens. Here is what I received. The Arsenal 257420 bullet on the far right is a shortend version of the bullet to its left. I simply turned off the gas check heel in the lathe.

I'm going to start with some moderate smokeless loads to establish a baseline. More to follow   Wink
  
Back to top
 
IP Logged
 
Dellet
Frequent Elocutionist
*****
Offline



Posts: 1102
Joined: May 19th, 2017
Re: Anybody shooting .25rf Stevens?
Reply #102 - Sep 27th, 2021 at 11:34am
Print Post  
ndnchf wrote on Sep 26th, 2021 at 2:09pm:
Santa came in September! That is in the form of Dellet, who very generously sent my a variety of bullets to try in my .25 Stevens. Here is what I received. The Arsenal 257420 bullet on the far right is a shortend version of the bullet to its left. I simply turned off the gas check heel in the lathe.

I'm going to start with some moderate smokeless loads to establish a baseline. More to follow   Wink


No range report yet?

What does that shortened 257420 Weigh?
  
Back to top
 
IP Logged
 
ndnchf
Frequent Elocutionist
*****
Offline



Posts: 1067
Joined: Mar 6th, 2014
Re: Anybody shooting .25rf Stevens?
Reply #103 - Sep 27th, 2021 at 11:38am
Print Post  
Not yet. I hope to get to the range this week. The shortened bullet weighs about 59gr.
  
Back to top
 
IP Logged
 
ndnchf
Frequent Elocutionist
*****
Offline



Posts: 1067
Joined: Mar 6th, 2014
Re: Anybody shooting .25rf Stevens?
Reply #104 - Sep 28th, 2021 at 7:18pm
Print Post  
I finished the 2nd batch of .25 Stevens centerfire brass. This gives me 40 pieces, plus 25 reloadable rimfire cases. I should be set now  Smiley
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 ... 5 6 [7] 8 9 ... 17
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.7410 seconds.