ASSRA Forum - Lyman Junior Target Spot Scope in 10X power

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Lyman Junior Target Spot Scope in 10X power

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Lyman Junior Target Spot Scope in 10X power (Read 3328 times)

Two Flints Participating Member Offline Posts: 11 Location: Northern Maine Joined: Feb 27^th, 2013	Lyman Junior Target Spot Scope in 10X power Oct 26^th, 2017 at 3:31pm	Print Post
	Hello all, Does anyone know who might have parts for the Lyman Junior Target Spot Scope (10X power). I was about to take my Stevens Walnut Hill in 22 out for a quick shoot and screw holding the ring tight on the scope tube just broke off. I added a new screw and nut, but would like to keep my Stevens all original. This is the piece/part I repaired. You can see the new screw and nut I installed. (You need to *Login* or *Register* to view media files and links) Two Flints


	IP Logged

Redsetter Frequent Elocutionist Offline Posts: 3468 Location: New York Joined: Aug 6^th, 2013	Re: Lyman Junior Target Spot Scope in 10X power Reply #1 - Oct 26^th, 2017 at 4:06pm	Print Post
	Complete clamp rings for 3/4" tubes are often listed on ebay for around $20.


	IP Logged

nuclearcricket Oldtimer Offline Posts: 749 Joined: Oct 15^th, 2008	Re: Lyman Junior Target Spot Scope in 10X power Reply #2 - Oct 27^th, 2017 at 9:27am	Print Post
	I don't know what the clamp rings on the MVA and DZ scopes look like but they might be a source. I would give them a call and ask. Sam


	IP Logged

.22Hepburn Oldtimer Offline Posts: 803 Location: Pennsylvania Joined: Feb 18^th, 2008	Re: Lyman Junior Target Spot Scope in 10X power Reply #3 - Oct 27^th, 2017 at 10:37am	Print Post
	Call Gary Quinlan @ 215-766-3403. He had some clamps and screws for Winchester and Lyman scopes on his table at the Allentown gun show last weekend.


	Facebook IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 16149 Location: Oregon Joined: Feb 2^nd, 2009	Re: Lyman Junior Target Spot Scope in 10X power Reply #4 - Oct 27^th, 2017 at 11:10am	Print Post
	If it's just a broken screw I'm unsure why one would buy a new clamp ring? If you have a local gunsmith I'd simply take the scope or ring to him and see if he's got a new screw in a parts box that fits the thread. I have a plastic storage box full of gun screws I've saved over decades of fixing guns, and it's my go to source whenever I need a screw.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

beltfed Frequent Elocutionist Offline Posts: 1755 Location: Central Wi Joined: Dec 20^th, 2007	Re: Lyman Junior Target Spot Scope in 10X power Reply #5 - Oct 27^th, 2017 at 12:18pm	Print Post
	Parsons scope service has all the remaining orig parts from Lyman for the old scopes. Dick Parsons 513-867-0820


	IP Logged

Two Flints Participating Member Offline Posts: 11 Location: Northern Maine Joined: Feb 27^th, 2013	Re: Lyman Junior Target Spot Scope in 10X power Reply #6 - Oct 27^th, 2017 at 12:54pm	Print Post
	Thanks Guys, You've given me several "where to go" choices . . . appreciate the replies! Two Flints


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.1567 seconds.