ASSRA Forum - Need Help with Martini International Mark II

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Need Help with Martini International Mark II

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Need Help with Martini International Mark II (Read 2657 times)

whiskeyralph Participating Member Offline Posts: 24 Location: Missouri Joined: Feb 3^rd, 2007	Need Help with Martini International Mark II Oct 11^th, 2017 at 11:39pm	Print Post
	Was shooting my Mark II today and after firing a round the action would not open. The block will drop about 1/3 of the way and that's it? Block will not go down far enough to get the action out of the gun. Anyone have any suggestions? Could it have anything to do with the sear adjustment screw? Any help would be appreciated


	IP Logged

MartiniBelgian Frequent Elocutionist Offline Posts: 1676 Location: Aarschot Joined: Jun 7^th, 2004	Re: Need Help with Martini International Mark II Reply #1 - Oct 12^th, 2017 at 7:22am	Print Post
	Seems like the bock stops when it needs to activate the extractor, stuck case? Issue with extractor/ejector? That would be my 1st thought...


	WWW IP Logged

whiskeyralph Participating Member Offline Posts: 24 Location: Missouri Joined: Feb 3^rd, 2007	Re: Need Help with Martini International Mark II Reply #2 - Oct 12^th, 2017 at 11:05am	Print Post
	I don't believe it is a stuck case. Could be problem with extractor, but still wonder what the solution is?


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 16149 Location: Oregon Joined: Feb 2^nd, 2009	Re: Need Help with Martini International Mark II Reply #3 - Oct 12^th, 2017 at 1:03pm	Print Post
	I'd probably put a cleaning rod down the barrel and tap the case as I applied pressure to the lever. It may help the extractor move and the tapping/lever pressure together might open the action.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

whiskeyralph Participating Member Offline Posts: 24 Location: Missouri Joined: Feb 3^rd, 2007	Re: Need Help with Martini International Mark II Reply #4 - Oct 12^th, 2017 at 2:57pm	Print Post
	Got it figured out. The tumbler was broke and jamming up the whole system. The only way to remove the group at this point is to remove the buttstock and drive out the back hinge pin. This will allow the trigger group to drop straight down. Anybody know where I can find a tumbler?


	IP Logged

beltfed Frequent Elocutionist Offline Posts: 1755 Location: Central Wi Joined: Dec 20^th, 2007	Re: Need Help with Martini International Mark II Reply #5 - Oct 12^th, 2017 at 4:34pm	Print Post
	Seems to me there is an outfit in the UK/England that has a website. Maybe the NRA/UK. Google, ask about Martini INtl parts. Now you got me to thinking about mine. If parts break. beltfed/arnie


	IP Logged

Myers Senior Forum Member Offline Posts: 382 Joined: Mar 5^th, 2013	Re: Need Help with Martini International Mark II Reply #6 - Oct 13^th, 2017 at 7:30pm	Print Post
	(You need to *Login* or *Register* to view media files and links)


	IP Logged

BudHyett Senior Forum Member Offline Posts: 256 Location: Pacific Northwest, WA State Joined: Jun 25^th, 2011	Re: Need Help with Martini International Mark II Reply #7 - Oct 13^th, 2017 at 9:36pm	Print Post
	An extractor broke and I saved both parts. Local gunsmith TIG-welded the parts together and filed off the excess weld to fit. The extractor functions fine today. This is another option.

	Country boy from Illinois living in the magical Pacific Northwest
	Facebook IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.8452 seconds.