ASSRA Forum - 38 Cal, 1.22 Long, Ellipical GB

ASSRA Forum › General › Reloading the Single Shot Rifle › 38 Cal, 1.22 Long, Ellipical GB

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: [1] 2

Hot Topic (More than 10 Replies)

38 Cal, 1.22 Long, Ellipical GB (Read 8508 times)

frnkeore Frequent Elocutionist Offline Posts: 7674 Location: Central Point, OR 97502 Joined: Jun 16^th, 2010	38 Cal, 1.22 Long, Ellipical GB Mar 27^th, 2017 at 1:02pm	Print Post
	Ok, my arm is officially twisted Back again is the 1.22 long bullet mold. Sign up here: 1. craigd, 1 cav, alum, .381 2. SSShooter, 2 cav, brass, .376 3. sharps 4. Oldeyes, 1 cav, alum, .381 5. Dusty Rhoads, 2 cav, brass, .381 6. Dusty Rhoads, 2 cav, brass, .381 7. jy3855, 1 cav, brass, .376 Frank
	« Last Edit: Apr 13^th, 2017 at 11:35am by frnkeore »
	ASSRA Member #696, ISSA Member #339
	YIM AIM IP Logged

Oldeyes Participating Member Offline Posts: 17 Location: AZ Desert, E o' Tombstone Joined: Dec 28^th, 2016	Re: 38 Cal, 1.22 Long, Ellipical GB Reply #1 - Mar 27^th, 2017 at 1:14pm	Print Post
	If you do not get enough folks for the longer bullet group buy, I would be happy to substitute this one in .376 single cavity aluminum. Joe
	« Last Edit: Mar 27^th, 2017 at 5:32pm by Oldeyes »

	IP Logged

frnkeore Frequent Elocutionist Offline Posts: 7674 Location: Central Point, OR 97502 Joined: Jun 16^th, 2010	Re: 38 Cal, 1.22 Long, Ellipical GB Reply #2 - Mar 27^th, 2017 at 1:35pm	Print Post
	Joe, I will certainly keep that option. Frank

	ASSRA Member #696, ISSA Member #339
	YIM AIM IP Logged

craigd Frequent Elocutionist Offline Posts: 2059 Location: midwest Joined: Feb 22^nd, 2009	Re: 38 Cal, 1.22 Long, Ellipical GB Reply #3 - Mar 27^th, 2017 at 1:55pm	Print Post
	Thanks much Frank. If it matters, mine would be for a .380"/.381" base. edit to add, aluminum one cavity
	« Last Edit: Mar 27^th, 2017 at 6:29pm by craigd »

	IP Logged

frnkeore Frequent Elocutionist Offline Posts: 7674 Location: Central Point, OR 97502 Joined: Jun 16^th, 2010	Re: 38 Cal, 1.22 Long, Ellipical GB Reply #4 - Mar 27^th, 2017 at 2:06pm	Print Post
	Thank you Craig. I will also need, from all that want this: brass or alum number of cavitys .376 or .381 Frank

	ASSRA Member #696, ISSA Member #339
	YIM AIM IP Logged

SSShooter Frequent Elocutionist Offline Posts: 2944 Location: Southern NJ Joined: Aug 1^st, 2010	Re: 38 Cal, 1.22 Long, Ellipical GB Reply #5 - Mar 27^th, 2017 at 5:43pm	Print Post
	Brass, 2-cavity, 0.376". Thanks, Frank.

	Glenn - Stevens 044 1/2, Bartlein SS 5R barrel in 22LR
	GTalk IP Logged

Dusty Rhodes Full Member Offline Posts: 175 Joined: Apr 28^th, 2016	Re: 38 Cal, 1.22 Long, Ellipical GB Reply #6 - Mar 28^th, 2017 at 7:22pm	Print Post
	Hi Frank, What would be the slowest twist this one would stabilize in ? I have a little Sharps with re barrel @ 1:20. I know, they are usually 1:18, but this one measures at 1:20.


	IP Logged

frnkeore Frequent Elocutionist Offline Posts: 7674 Location: Central Point, OR 97502 Joined: Jun 16^th, 2010	Re: 38 Cal, 1.22 Long, Ellipical GB Reply #7 - Mar 28^th, 2017 at 10:10pm	Print Post
	It's close on the .375 groove but, should be good on the .380. A SG of 1.5 is stable and 1.4 is the lower end of stability. The first one is the .380 groove. Frank

	ASSRA Member #696, ISSA Member #339
	YIM AIM IP Logged

Oldeyes Participating Member Offline Posts: 17 Location: AZ Desert, E o' Tombstone Joined: Dec 28^th, 2016	Re: 38 Cal, 1.22 Long, Ellipical GB Reply #8 - Mar 29^th, 2017 at 10:52am	Print Post
	If it works at 20" it will stabilize at 18".. Please put me down for a single cavity aluminum at .381 diameter. Thanks, Joe


	IP Logged

frnkeore Frequent Elocutionist Offline Posts: 7674 Location: Central Point, OR 97502 Joined: Jun 16^th, 2010	Re: 38 Cal, 1.22 Long, Ellipical GB Reply #9 - Mar 29^th, 2017 at 11:20am	Print Post
	Updated as of 3/29, 8am Frank

	ASSRA Member #696, ISSA Member #339
	YIM AIM IP Logged

craigd Frequent Elocutionist Offline Posts: 2059 Location: midwest Joined: Feb 22^nd, 2009	Re: 38 Cal, 1.22 Long, Ellipical GB Reply #10 - Apr 2^nd, 2017 at 11:47pm	Print Post
	If it's okay, I'll dig this one out of the mysteriously disappeared pile just in case there's enough interest to give it a go over at NOE.


	IP Logged

frnkeore Frequent Elocutionist Offline Posts: 7674 Location: Central Point, OR 97502 Joined: Jun 16^th, 2010	Re: 38 Cal, 1.22 Long, Ellipical GB Reply #11 - Apr 3^rd, 2017 at 2:52am	Print Post
	Craig, it's all yours I don't have a 38 rifle in any twist so, I can't be of much help. Frank

	ASSRA Member #696, ISSA Member #339
	YIM AIM IP Logged

Dusty Rhodes Full Member Offline Posts: 175 Joined: Apr 28^th, 2016	Re: 38 Cal, 1.22 Long, Ellipical GB Reply #12 - Apr 3^rd, 2017 at 7:57pm	Print Post
	Hi Frank, if we don't get enough for the longer bullet, I will jump in for.... 2 x Brass double cavity in .381. Thanks. Ian.


	IP Logged

bpsmoke Participating Member Offline Posts: 39 Joined: May 5^th, 2010	Re: 38 Cal, 1.22 Long, Ellipical GB Reply #13 - Apr 4^th, 2017 at 6:39am	Print Post
	Frank, where are you generating those SG graphs from? Thanks


	IP Logged

frnkeore Frequent Elocutionist Offline Posts: 7674 Location: Central Point, OR 97502 Joined: Jun 16^th, 2010	Re: 38 Cal, 1.22 Long, Ellipical GB Reply #14 - Apr 4^th, 2017 at 9:58am	Print Post
	bpsmoke wrote on Apr 4^th, 2017 at 6:39am: Frank, where are you generating those SG graphs from? Thanks (You need to *Login* or *Register* to view media files and links)

	ASSRA Member #696, ISSA Member #339
	YIM AIM IP Logged

Page Index Toggle

Pages: [1] 2

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.5920 seconds.