ASSRA Forum › General › Gunsmithing Single Shot Rifles › Zischang Borchardt Double Set Trigger
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: [1] 2  Send TopicPrint
Hot Topic (More than 10 Replies) Zischang Borchardt Double Set Trigger (Read 6235 times)
Dales
Senior Forum Member
****
Offline



Posts: 313
Location: Western NY
Joined: Oct 21st, 2013
Zischang Borchardt Double Set Trigger
Mar 22nd, 2017 at 3:27pm
Print Post  
I purchased a set of blank parts from forum member rodneys last fall and thought I would report how they worked out.
The drawings alone that he sent with the water cut blanks where worth the price. I have machined the parts and milled my action and installed the triggers and they seem to function fine, at this point I have dry fired only hope to drill for scope mounts soon and do some shooting when the weather gets a little better.
The only problem I had was that my action required drilling a pin hole and milling the bottom and there was not a drawing locating them but I managed to locate close enough .

Dales
  
Back to top
 
IP Logged
 
JerryH
Frequent Elocutionist
*****
Offline


ASSRA Member #10876

Posts: 1262
Location: Easton, CA
Joined: Nov 9th, 2014
Re: Zischang Borchardt Double Set Trigger
Reply #1 - Mar 22nd, 2017 at 4:30pm
Print Post  
Very nice machine work Dales. Do you have a picture of them installed on the rifle?

JerryH
  
I'm not a complete idiot, some of my parts are missing.
Back to top
 
IP Logged
 
Dales
Senior Forum Member
****
Offline



Posts: 313
Location: Western NY
Joined: Oct 21st, 2013
Re: Zischang Borchardt Double Set Trigger
Reply #2 - Mar 23rd, 2017 at 10:45am
Print Post  
Jerry
A couple of pics mounted .   Action will need to be refinished and I am waiting for a Zischang but plate so I can finish the wood  .
Dales
  
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10625
Joined: Apr 8th, 2009
Re: Zischang Borchardt Double Set Trigger
Reply #3 - Mar 23rd, 2017 at 11:01am
Print Post  
Very nice work Dales and challenging.

Yours Sincerely
John Louis
  
" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
Old-Win
Frequent Elocutionist
*****
Offline



Posts: 1725
Location: Minnesota
Joined: Nov 24th, 2005
Re: Zischang Borchardt Double Set Trigger
Reply #4 - Mar 23rd, 2017 at 11:18am
Print Post  
Dale, very nice work.  How many hours and how much for Rodney's parts?  I'm wondering how much a machinist could charge for their manufacture? Probably not much of a market though.  Bob
  
Back to top
 
IP Logged
 
Dales
Senior Forum Member
****
Offline



Posts: 313
Location: Western NY
Joined: Oct 21st, 2013
Re: Zischang Borchardt Double Set Trigger
Reply #5 - Mar 23rd, 2017 at 1:36pm
Print Post  
Bob
Thanks . As I recall Rodeny charged $50.00 . As to machine time I could not guess , my mill is a small Grizzly bench top so I think my time would not be a standard for a real machinest .
Market would be small . 
Dales
  
Back to top
 
IP Logged
 
Dales
Senior Forum Member
****
Offline



Posts: 313
Location: Western NY
Joined: Oct 21st, 2013
Re: Zischang Borchardt Double Set Trigger
Reply #6 - Mar 23rd, 2017 at 1:41pm
Print Post  
John 
Thank you.
The rifle is in 25-21, the cartridge I asked you about.
Dale
  
Back to top
 
IP Logged
 
JerryH
Frequent Elocutionist
*****
Offline


ASSRA Member #10876

Posts: 1262
Location: Easton, CA
Joined: Nov 9th, 2014
Re: Zischang Borchardt Double Set Trigger
Reply #7 - Mar 23rd, 2017 at 6:41pm
Print Post  
Thanks for the pictures with the triggers installed. That's going to be a fine looking rifle when it's finished. I hope you'll continue to share pictures along the way to completion. 

JerryH
  
I'm not a complete idiot, some of my parts are missing.
Back to top
 
IP Logged
 
AndyZ
Ex Member


Re: Zischang Borchardt Double Set Trigger
Reply #8 - Mar 23rd, 2017 at 7:51pm
Print Post  
Very nice Dale.  Will I get to see it at Alabama?                 andy Z
  
Back to top
 
IP Logged
 
Dales
Senior Forum Member
****
Offline



Posts: 313
Location: Western NY
Joined: Oct 21st, 2013
Re: Zischang Borchardt Double Set Trigger
Reply #9 - Mar 23rd, 2017 at 8:44pm
Print Post  
Hi Andy
Sure plan on shooting it there, Can't wait for May
Dale
  
Back to top
 
IP Logged
 
kelleyrepair
Participating Member
*
Offline



Posts: 20
Location: Baja New York (FL)
Joined: Apr 28th, 2012
Re: Zischang Borchardt Double Set Trigger
Reply #10 - Apr 1st, 2017 at 11:06pm
Print Post  
Are these parts sets still available?  Any info much appreciated!
  
Back to top
 
IP Logged
 
Dales
Senior Forum Member
****
Offline



Posts: 313
Location: Western NY
Joined: Oct 21st, 2013
Re: Zischang Borchardt Double Set Trigger
Reply #11 - Apr 2nd, 2017 at 1:44pm
Print Post  
rodenys is a member here message him 
Dale
  
Back to top
 
IP Logged
 
Dales
Senior Forum Member
****
Offline



Posts: 313
Location: Western NY
Joined: Oct 21st, 2013
Re: Zischang Borchardt Double Set Trigger
Reply #12 - Mar 4th, 2018 at 8:27pm
Print Post  
Some pics of Rodneys parts
Dales
  
Back to top
 
IP Logged
 
Amoretti
Full Member
***
Offline



Posts: 214
Location: thermopolis, Wy
Joined: Nov 2nd, 2009
Re: Zischang Borchardt Double Set Trigger
Reply #13 - Mar 4th, 2018 at 8:35pm
Print Post  
Thanks for posting!

The triggers look great.

John
  
Back to top
 
IP Logged
 
idjeffp
Senior Forum Member
****
Offline



Posts: 343
Location: Boise, ID
Joined: Nov 11th, 2017
Re: Zischang Borchardt Double Set Trigger
Reply #14 - Mar 4th, 2018 at 10:28pm
Print Post  
Nice work Dales! I need to get another Zischang buttplate ordered as well...
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: [1] 2 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.6806 seconds.