ASSRA Forum › General › Collecting Single Shot Rifles › Stevens tang sight screws.
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Stevens tang sight screws. (Read 2345 times)
Redsetter
Frequent Elocutionist
*****
Offline



Posts: 3468
Location: New York
Joined: Aug 6th, 2013
Stevens tang sight screws.
Sep 22nd, 2016 at 10:45am
Print Post  
Rather surprised to find that Wisener's did not list them, but this company does:  (You need to Login or Register to view media files and links)

Any complaints?  At least they do not INSIST on mailing them in a Priority box, for which the customer is not supposed to mind paying an utterly unnecessary $6 or (in the case of Outback Parts) $8.
  
Back to top
 
IP Logged
 
Rebel
Frequent Elocutionist
*****
Offline



Posts: 4292
Location: Rockets and Race Cars
Joined: Mar 9th, 2015
Re: Stevens tang sight screws.
Reply #1 - Sep 22nd, 2016 at 10:51am
Print Post  
great resource for sunshades too, thanks!
Aaron
  
WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence. Let's Go Sonny!
Back to top
 
IP Logged
 
slumlord44
Frequent Elocutionist
*****
Offline



Posts: 2850
Location: Lebanon, Illinois 62254
Joined: Dec 21st, 2007
Re: Stevens tang sight screws.
Reply #2 - Sep 22nd, 2016 at 11:10pm
Print Post  
CPA also has them.
  
Back to top
 
IP Logged
 
kensmachine
Oldtimer
*****
Offline



Posts: 574
Joined: Nov 21st, 2012
Re: Stevens tang sight screws.
Reply #3 - Sep 23rd, 2016 at 10:02am
Print Post  
I also have them made for Stevens sights ,Lyman/Marble sights,and Parts Unknow/Red River ken  (You need to Login or Register to view media files and links)
« Last Edit: Sep 23rd, 2016 at 10:13am by kensmachine »  
Back to top
 
IP Logged
 
Redsetter
Frequent Elocutionist
*****
Offline



Posts: 3468
Location: New York
Joined: Aug 6th, 2013
Re: Stevens tang sight screws.
Reply #4 - Sep 23rd, 2016 at 10:55am
Print Post  
kensmachine wrote on Sep 23rd, 2016 at 10:02am:
I also have them made for Stevens sights ,Lyman/Marble sights,and Parts Unknow/Red River ken  (You need to Login or Register to view media files and links)


What I'm actually going to need, to fit a special thick base, are extra long ones, at least 3/8", with heads reduced in diameter to fit the recesses in this base--not over .206" diameter.  Could you make these up?

  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.9816 seconds.