Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic annealing gas chhecks (Read 2974 times)
Hank45
Oldtimer
*****
Offline


Beer is living proof that
GOD loves you

Posts: 506
Location: MA
Joined: Jan 21st, 2010
annealing gas chhecks
May 18th, 2016 at 5:45am
Print Post  
I read somewhere that annealing the gas check helps to stabilize the flight of the bullet? Thanks for your reply, Hank
  
Back to top
 
IP Logged
 
Premod70
Oldtimer
*****
Offline



Posts: 873
Location: North Carolina
Joined: Jan 16th, 2016
Re: annealing gas chhecks
Reply #1 - May 18th, 2016 at 9:22am
Print Post  
Gas checks must be square to the base of the bullet and sometimes when the checks are formed they are work hardened to the point of being hard the fit properly. Annealing the checks softens the metal for a better fit to the bullet thus better accuracy due to uniformity. The check in itself does not aid accuracy but installed incorrectly it can be a deterent.
  
Back to top
 
IP Logged
 
KAF
Ex Member


Re: annealing gas chhecks
Reply #2 - May 18th, 2016 at 9:49am
Print Post  
As a side note for those that are not familiar with the rules.
Section 2.01: Bullets
Bullets must be of lead or lead alloy with no metallic gas checks, half jackets or other metallic jackets. These
may be loaded from either the muzzle or the breech and may be paper patched at the shooter’s option.
  
Back to top
 
IP Logged
 
.22-5-40
Oldtimer
*****
Offline



Posts: 828
Joined: Feb 13th, 2010
Re: annealing gas chhecks
Reply #3 - May 18th, 2016 at 3:08pm
Print Post  
Watch out for the dreaded Gas-Check police!  O.P. said nothing of using G.C. loads in competition.  I have been a member since the late 1980's..and have no qualms of using these little copper cups which have been around since the British started using them in their nitro for black loads around the turn of the 20th century.
  
Back to top
 
IP Logged
 
calledflyer
Frequent Elocutionist
*****
Offline



Posts: 3971
Joined: Mar 9th, 2015
Re: annealing gas chhecks
Reply #4 - May 18th, 2016 at 4:39pm
Print Post  
Hank, I did it one time, since I'd been told "it's the thing to do". Used a frying pan to cook up half a box of .32 cal checks. Then, I had to clean up the mess with good ol' Lemishine because they were black and ugly. (I think they had some forming lube or something on them). Anyhow, they are softer than the rest of the box, but don't shoot a bit better than the others from the same box. I just mixed them back up together and now and then shoot twenty or so. Take me the next three lives to shoot both boxes I own.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint