ASSRA Forum › General › Single Shot Rifles › Danish RB
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: [1] 2 3  Send TopicPrint
Very Hot Topic (More than 25 Replies) Danish RB (Read 17095 times)
dohrmc
Ex Member


Danish RB
Feb 18th, 2016 at 8:25pm
Print Post  
Tough first post, nice Danish RB, but it seems I cannot post a picture of it. 
Excellent shape, hope to get it shooting, but right now would settle for posting a picture of it.
  
Back to top
 
IP Logged
 
chawk
Full Member
***
Offline



Posts: 208
Location: Virginia
Joined: Jan 29th, 2014
Re: Danish RB
Reply #1 - Feb 18th, 2016 at 8:30pm
Print Post  
try now.  I think you need one post to be able to post pics.
  
Back to top
 
IP Logged
 
dohrmc
Ex Member


Re: Danish RB
Reply #2 - Feb 18th, 2016 at 8:36pm
Print Post  
Ok, the picture comes out very messed up- I have resized them all.
I will reply to this post with another attempt.
  
Back to top
 
IP Logged
 
dohrmc
Ex Member


Re: Danish RB
Reply #3 - Feb 18th, 2016 at 8:39pm
Print Post  
No go, it takes all comments , distorts them, and slaps an enormous photo over everything.
Oh well. Nothing in help section.

Will try photobucket route.
« Last Edit: Feb 18th, 2016 at 8:44pm by »  
Back to top
 
IP Logged
 
dohrmc
Ex Member


Re: Danish RB
Reply #4 - Feb 18th, 2016 at 8:43pm
Print Post  
(You need to Login or Register to view media files and links)
  
Back to top
 
IP Logged
 
dohrmc
Ex Member


Re: Danish RB
Reply #5 - Feb 18th, 2016 at 8:44pm
Print Post  
Went to photobucket
  
Back to top
 
IP Logged
 
Water Bug
Full Member
***
Offline



Posts: 158
Location: north country NYS
Joined: Oct 11th, 2012
Re: Danish RB
Reply #6 - Feb 19th, 2016 at 7:51am
Print Post  
Beautiful rifle,  what is the question?  What caliber is it? or what diameter is the bore?   Can you do a chamber cast?  WB
  
Back to top
 
IP Logged
 
Fred Boulton
Oldtimer
*****
Offline



Posts: 801
Joined: Jan 6th, 2007
Re: Danish RB
Reply #7 - Feb 19th, 2016 at 8:11am
Print Post  
I had one of these some years ago. I fully annealed 45/70 brass and fire-formed it to the chamber. After that, I neck sized only. It was used in the club black powder cartridge off-hand competition and won it several times, but I always had difficulty with the extreme drop on the stock and eventually sold it. As always when you sell something good, I wish I still had it now!
  
Back to top
 
IP Logged
 
dohrmc
Ex Member


Re: Danish RB
Reply #8 - Feb 19th, 2016 at 9:33am
Print Post  
It is 11.7x???.  I will be making a chamber cast to determine what I need to make up some ammo of the correct length.  I have already slugged the barrel.
I have looked down that barrel since I was about 8 yrs old and it is time to get it shooting.
I can easily rationalize reloading, just have not done it before. I assume used equipment in good condition is fine.
I have shot a lot using my flintlock, so I am familiar with black powder, just not knowledgeable about making cartridges. I do have Nonte's Cartridge Conversion book, and will be using that info for starters.
He suggests fire forming 45-70 brass. Any pitfalls to look out for?
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11512
Location: Why, out West of course
Joined: May 29th, 2006
Re: Danish RB
Reply #9 - Feb 19th, 2016 at 10:20am
Print Post  
I have one too. Previous owner could not get it to shoot accurate. Twist on mine is twenty nine inches. To slow to stabilize heavy bullets. Shoots short bullets excellent. I used 45-70 brass. Don't remember if I trimmed it. Think I must have.  Won one musket match with it, only match I ever used it for. Shot a perfect 50 on the old 5V target. Rifle has a extra heavy trigger pull.

Base size of the 45-70 cases are a bit small for my rifle. Sits in the gun rack. Shot straight BP in mine. Have about fifty original cases but take Berdan primers. 

             Joe.
« Last Edit: Feb 20th, 2016 at 9:46pm by westerner »  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
dohrmc
Ex Member


Re: Danish RB
Reply #10 - Feb 19th, 2016 at 1:46pm
Print Post  
Hmmmm, I have made lots of small coil springs as actuators for my model airplanes. Making a flat spring should not be too tough, except for the fiddling required to get it right.
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16269
Location: Oregon
Joined: Feb 2nd, 2009
Re: Danish RB
Reply #11 - Feb 19th, 2016 at 6:59pm
Print Post  
Quote:
Hmmmm, I have made lots of small coil springs as actuators for my model airplanes. Making a flat spring should not be too tough, except for the fiddling required to get it right.


Making a flat spring would be repeating what your Roller has now. The piano wire spring shown gives a much nicer, and lighter trigger pull.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
JS47
Frequent Elocutionist
*****
Offline



Posts: 1265
Location: Arizona
Joined: Oct 12th, 2012
Re: Danish RB
Reply #12 - Feb 19th, 2016 at 11:12pm
Print Post  
I have a friend who has a Danish in as new condition.  The fool won't sell it to me though.  I loaded some PP rounds for it using 45-70 brass with the size die backed way out. After fire forming the brass was swelled out at the base but left unsized, other than the neck, it fit the chamber and functioned fine.

JS
  
Back to top
 
IP Logged
 
Singleshotlover
Oldtimer
*****
Offline



Posts: 625
Location: New Iberia,Louisiana
Joined: Jun 11th, 2006
Re: Danish RB
Reply #13 - Feb 20th, 2016 at 12:31am
Print Post  
Might be my old eyes but your pic has led me to ask this question.  In looking at the breech block just where the hammer sits when fired is that a crack in the block?. See sort of a black line just above the hammer. Frank
  
Singleshotlover
Back to top
 
IP Logged
 
dohrmc
Ex Member


Re: Danish RB
Reply #14 - Feb 20th, 2016 at 10:29am
Print Post  
No, there are no cracks. Actually, the bore, action, and chamber look like it was hardly ever used. The bore looks new.
I took it to my trusted gun smith and had him look it over. He gave it a clean bill of health.

I was a professional pilot, military and civilian, for most of my life. I am totally Obsessive Compulsive about things I use being in perfect order. I am the guy you would want to buy a used car from, as I am a little nuts about things being perfect. (This attitude does not apply to the neatness of my workbench).

No worries, there are no cracks. Smiley
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: [1] 2 3 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.2471 seconds.