ASSRA Forum - another rolling block ID question

ASSRA Forum › General › Single Shot Rifles › another rolling block ID question

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

another rolling block ID question (Read 2248 times)

Water Bug Full Member Offline Posts: 158 Location: north country NYS Joined: Oct 11^th, 2012	another rolling block ID question Jan 12^th, 2016 at 2:28pm	Print Post
	Recently I acquired a Swedish (?) Rolling block that has a difference from any pictures I have seen. It looks like Swedish markings . This one has the bar and one screw holding both big pins , as on All the Remington made RB's. Swedish RB's in pictures have a partial screw holding each pin. Can anyone tell me what model or variation this is? Pictures WB


	IP Logged

Singleshotlover Oldtimer Offline Posts: 625 Location: New Iberia,Louisiana Joined: Jun 11^th, 2006	Re: another rolling block ID question Reply #1 - Jan 13^th, 2016 at 12:06am	Print Post
	My sporter RRB in 8x58 Danish is dated 1875 and was one of the ones recasehardened, new hammer and block. Same as yours. Mine was converted in 1892 if memory serves. Frank

	Singleshotlover
	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 16129 Location: Oregon Joined: Feb 2^nd, 2009	Re: another rolling block ID question Reply #2 - Jan 13^th, 2016 at 9:25am	Print Post
	Early Swedish Rolling Blocks were very similar to the parent Remington Rolling Blocks. Those with setscrews holding the pins were later variations. Of course the very first Swedish Rolling Blocks were either actions supplied by Remington, or parts supplied by Remington, until Sweden got up to full production of their own rifles.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

Water Bug Full Member Offline Posts: 158 Location: north country NYS Joined: Oct 11^th, 2012	Re: another rolling block ID question Reply #3 - Jan 13^th, 2016 at 2:40pm	Print Post
	Shuetzendave, and all res ponders : Thank you very much. That last link to the Dutchman site really gave lots of great information. I had hoped someone knew where to find it. This Board and its members are really great . Thank you, WB


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.9962 seconds.