ASSRA Forum - Report on new Saeco mould 32-40

ASSRA Forum › General › Reloading the Single Shot Rifle › Report on new Saeco mould 32-40

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1 [2]

Very Hot Topic (More than 25 Replies)

Report on new Saeco mould 32-40 (Read 13445 times)

calledflyer Frequent Elocutionist Offline Posts: 4036 Joined: Mar 9^th, 2015	Re: Report on new Saeco mould 32-40 Reply #15 - Sep 15^th, 2015 at 11:18pm	Print Post
	I've used the blown-up bullet ploy to excuse high power misses, but never tried it on cast bullets. I must remember that. Print out the message to "prove" it can happen, too.


	IP Logged

Schuetzenmiester Frequent Elocutionist Offline Posts: 6707 Location: Cool Wet Side of WA Joined: Apr 27^th, 2008	Re: Report on new Saeco mould 32-40 Reply #16 - Sep 16^th, 2015 at 12:58am	Print Post
	Are you using or have access to a chronograph? It should not be doing that! I suspect the velocity is not what it should be for some reason.

	"some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence
	IP Logged

Brudford01 Full Member Offline Posts: 196 Location: Beaver Falls PA Joined: May 18^th, 2008	Re: Report on new Saeco mould 32-40 Reply #17 - Sep 19^th, 2015 at 9:14pm	Print Post
	John Boy, I have been wanting to get back to you . I thought my groove diameter on my Douglas/CPA rifle barrel was a .321" also ? I took the forearm off tonight after casting some bullets with the new Saeco mould . The barrel is stamped Douglas xx .3192 GR , 5/2015 . Surprised that the groove is .319 ! Although my Hoch mould casts a .321-.322 , and the Saeco bullets I casted today come at .321 all should work ? Thanks


	IP Logged

GWarden Senior Forum Member Offline Posts: 317 Location: Marshalltown Iowa Joined: Apr 18^th, 2004	Re: Report on new Saeco mould 32-40 Reply #18 - Sep 20^th, 2015 at 10:27am	Print Post
	I am using RMC Everlast cases with small rifle primer pockets in my 32/40 for BP. Using 1 1/2Swiss at 200yd. First using Fed.GM match primers and getting tipping at 200yds. Switched to Rem 7 1/2 and tipping stopped. At 100yds. the Fed. GM match primers gave better accuracy than the Rem 7 1/2. Bob Iowa

	Game Warden: what boys dream of being and old men wish they could have been
	IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1674 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: Report on new Saeco mould 32-40 Reply #19 - Sep 20^th, 2015 at 12:01pm	Print Post
	Brudford01 wrote on Sep 19^th, 2015 at 9:14pm: John Boy, I have been wanting to get back to you . I thought my groove diameter on my Douglas/CPA rifle barrel was a .321" also ? I took the forearm off tonight after casting some bullets with the new Saeco mould . The barrel is stamped Douglas xx .3192 GR , 5/2015 . Surprised that the groove is .319 ! Although my Hoch mould casts a .321-.322 , and the Saeco bullets I casted today come at .321 all should work ? Thanks All the bullets I shoot in my Douglas .319 barrel are .321-.322 on the base band. This is a 10 shot group from my best shooting bullet to date. Its a Mos 205 gr spitzer 1.1 in long .322 base band 10.6gr #9.

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

frnkeore Frequent Elocutionist Offline Posts: 7729 Location: Central Point, OR 97502 Joined: Jun 16^th, 2010	Re: Report on new Saeco mould 32-40 Reply #20 - Sep 20^th, 2015 at 4:36pm	Print Post
	Just a little technicality and it only really matters in match shooting but, you have to subtract the groove diameter and not the base band diameter to obtain the group size. Frank

	ASSRA Member #696, ISSA Member #339
	YIM AIM IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1674 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: Report on new Saeco mould 32-40 Reply #21 - Sep 20^th, 2015 at 4:41pm	Print Post
	frnkeore wrote on Sep 20^th, 2015 at 4:36pm: Just a little technicality and it only really matters in match shooting but, you have to subtract the groove diameter and not the base band diameter to obtain the group size. Frank Good point. I did think about it after the fact. Bob

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

Brudford01 Full Member Offline Posts: 196 Location: Beaver Falls PA Joined: May 18^th, 2008	Re: Report on new Saeco mould 32-40 Reply #22 - Sep 20^th, 2015 at 6:36pm	Print Post
	Nice group ! So my Douglas barrel 32-40 on my CPA rifle is standard then at .319 ? My Hoch and Saeco moulds are also casting .320-.322 . So I guess i'am ok . Thanks


	IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1674 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: Report on new Saeco mould 32-40 Reply #23 - Sep 20^th, 2015 at 6:56pm	Print Post
	You should be fine shooting .321-.322 bullets in your .319 barrel. I was a little concerned myself with my rifle in the beginning. I discussed it with Paul Shuttleworth and learned his barrel is .319 shooting .321 - .322 dia bullets very well. Bob

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

RayH Oldtimer Offline Posts: 757 Location: Oldest City, FL Joined: Jan 4^th, 2012	Re: Report on new Saeco mould 32-40 Reply #24 - Sep 20^th, 2015 at 7:29pm	Print Post
	Bob K (etc.) - I'd like to see you & I and Brudford 01 - perhaps Jan Prichard (if he'd pull the .32-20CPA out of the closet:), Paul Shuttleworth, and a handful of other true enthusiasts get together for a ".32-20CPA BR Funfest". 100 - 200, score or group. It's great to see all of us having such a fine time with this single shot game. Cheers to all! Ray

	In GOD We Trust
	IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1674 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: Report on new Saeco mould 32-40 Reply #25 - Sep 21^st, 2015 at 9:23am	Print Post
	Lets not forget the most important component.

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

Page Index Toggle

Pages: 1 [2]

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.1543 seconds.