ASSRA Forum - Falling Block Works Model S ,calibres Question

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Falling Block Works Model S ,calibres Question

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Falling Block Works Model S ,calibres Question (Read 2883 times)

TWOGUNS Junior Member Offline Posts: 85 Joined: Oct 13^th, 2012	Falling Block Works Model S ,calibres Question Jul 4^th, 2015 at 1:59am	Print Post
	I have a FBW Model S which i have decided to sell and wondered if anyone can tell me the largest cartridge this action can handle [rimmed ] if a buyer wants to know what cals it handle Thanks TGS


	IP Logged

JerryH Frequent Elocutionist Offline ASSRA Member #10876 Posts: 1259 Location: Easton, CA Joined: Nov 9^th, 2014	Re: Falling Block Works Model S ,calibres Question Reply #1 - Jul 4^th, 2015 at 2:45am	Print Post
	Not sure what caliber it will handle, but if the action is smaller than the Model J I'm interested in it depending on price. Put me in line to purchase? I'll try to do some research. JerryH

	I'm not a complete idiot, some of my parts are missing.
	IP Logged

Bent_Ramrod Frequent Elocutionist Offline Posts: 1475 Location: Southern Arizona Joined: Feb 8^th, 2006	Re: Falling Block Works Model S ,calibres Question Reply #2 - Jul 4^th, 2015 at 8:57am	Print Post
	The Model S takes a 1"x14tpi barrel thread and should be able to handle any cartridge that a Winchester High Wall or Sharps Borchardt can.


	IP Logged

John Boy Ex Member	Re: Falling Block Works Model S ,calibres Question Reply #3 - Jul 4^th, 2015 at 9:50am	Print Post
	An ASSRA thread with details about the FBW ... (You need to *Login* or *Register* to view media files and links)


	IP Logged

JackHughs Oldtimer Offline Posts: 657 Location: Riverbank Joined: Sep 27^th, 2008	Re: Falling Block Works Model S ,calibres Question Reply #4 - Jul 4^th, 2015 at 1:01pm	Print Post
	This might help. JackHughs

	The best lack all conviction, while the worst Are full of passionate intensity. W.B. Yeats
	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.9834 seconds.