ASSRA Forum - Walker-Hepburn

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Walker-Hepburn

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: [1] 2

Hot Topic (More than 10 Replies)

Walker-Hepburn (Read 9263 times)

Chuckster Frequent Elocutionist Offline Posts: 2232 Location: Colorado Joined: May 15^th, 2008	Walker-Hepburn Apr 21^st, 2015 at 2:29pm	Print Post
	Finally, here is my version of a Walker-Hepburn action in the raw. It ended up more inspired by a Walker than a duplicate. Just copied everyone else I could find. 8620 steel receiver and breech block. Most everything else is casehardened mild steel except springs and firing pin. Started with the ASSRA Hepburn drawings and Tom Rowe’s excellent book, plus suggestions from several on this forum. Rotated the back half of the action up five degrees to reduce comb height, firing pin angle, and get some cam angle on the breech block. A toggle linkage like a Fraser action works better for a camming breech block than the Hopkins & Allen link used on the Walker. With a toggle linkage, a firing pin retractor is not a big issue, ala Winchester, so the rebounding and split tail hammer went away. Using a stirrup instead of a roller mainspring on the hammer gave room to install a Ballard type DST and sear arrangement. Extractor is a combination of several designs, but has primary and secondary extraction. Lever spring is more like a Hopkins & Allen instead of the Walker barrel mount. Lever is heat, beat, bend, weld, grind, and file. Wish I were a better welder and blacksmith. Still a lot of work to do but will get there eventually. Chuck


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 16137 Location: Oregon Joined: Feb 2^nd, 2009	Re: Walker-Hepburn Reply #1 - Apr 21^st, 2015 at 3:11pm	Print Post
	Wonderful start Chuck! Looks like you've got another beauty going!

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

DWT1885 Senior Forum Member Offline Posts: 396 Location: New Jersey Joined: Nov 25^th, 2010	Re: Walker-Hepburn Reply #2 - Apr 21^st, 2015 at 3:36pm	Print Post
	WOW !!! I'm impressed. It amazes me what kind of work some people can do on this forum. Hell, I can't sharpen a lawn mower blade without messing it up. Dale.

	35th Security Police Squadron, Phan Rang AB, RVN, May 70-71. All gave some, some gave all.
	IP Logged

RoyB Oldtimer Offline Posts: 838 Location: Dartmouth, MA Joined: Mar 28^th, 2011	Re: Walker-Hepburn Reply #3 - Apr 21^st, 2015 at 4:55pm	Print Post
	Simply amazing!

	Roy B Dartmouth, MA (You need to *Login* or *Register* to view media files and links)
	WWW IP Logged

harry_eales Ex Member	Re: Walker-Hepburn Reply #4 - Apr 21^st, 2015 at 5:50pm	Print Post
	It's looking great Chuck, I hope your arms are up to all the filing that has to be done on that lever. Harry


	IP Logged

SSShooter Frequent Elocutionist Offline Posts: 2917 Location: Southern NJ Joined: Aug 1^st, 2010	Re: Walker-Hepburn Reply #5 - Apr 21^st, 2015 at 5:57pm	Print Post
	Wow!! +1 That is some great work. Especially in the short amount of time since you first ask about drawings for same. Were you able to add any camming-action with the lever? What are you going to charge to make one? Think I would be happy with a simpler Helm-style lever that would not take as much work as you've obviously put into that.

	Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
	GTalk IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 11472 Location: Why, out West of course Joined: May 29^th, 2006	Re: Walker-Hepburn Reply #6 - Apr 21^st, 2015 at 6:22pm	Print Post
	Looking good! Joe.

	A blind squirrel runs into a tree every once in a while.
	IP Logged

oughtsix Global Moderator ASSRA Board Member Offline Posts: 1275 Location: Columbus Joined: May 31^st, 2009	Re: Walker-Hepburn Reply #7 - Apr 21^st, 2015 at 7:42pm	Print Post
	pretty darn good ! When can I order mine? -06

	Life Member ASSRA, OGCA & TSGC I'm all in favor of keeping dangerous weapons out the hands of fools. Let's start with typewriters........ Frank Lloyd Wright
	IP Logged

frnkeore Frequent Elocutionist Offline Posts: 7278 Location: Central Point, OR 97502 Joined: Jun 16^th, 2010	Re: Walker-Hepburn Reply #8 - Apr 21^st, 2015 at 7:52pm	Print Post
	I'm a machinist of 40+ years and you impress me to the hilt Great work, Chuck. How many order are you taking? I'll take mine as a striker Frank

	ASSRA Member #696, ISSA Member #339
	YIM AIM IP Logged

.22Hepburn Oldtimer Offline Posts: 803 Location: Pennsylvania Joined: Feb 18^th, 2008	Re: Walker-Hepburn Reply #9 - Apr 21^st, 2015 at 8:05pm	Print Post
	Great work indeed!


	Facebook IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: Walker-Hepburn Reply #10 - Apr 21^st, 2015 at 9:56pm	Print Post
	Love the way you timed the screws and a trade mark of a true perfectionist in my book. JLouis

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

JerryH Frequent Elocutionist Offline ASSRA Member #10876 Posts: 1241 Location: Easton, CA Joined: Nov 9^th, 2014	Re: Walker-Hepburn Reply #11 - Apr 22^nd, 2015 at 12:41am	Print Post
	I have a lathe and a vertical mill....... and continue to stumble along. This is way beyond amazing to me. I may have an edge on you though in the blacksmithing department. Growing up on a 4th generation farm you tend to learn things. Great job! Looking forward to seeing the finished rifle. JerryH

	I'm not a complete idiot, some of my parts are missing.
	IP Logged

art_ruggiero Frequent Elocutionist Offline Posts: 1090 Location: CT Joined: Dec 14^th, 2008	Re: Walker-Hepburn Reply #12 - Apr 22^nd, 2015 at 10:56am	Print Post
	chuckster; its about time you finished MY action art great craftsmenship!


	IP Logged

Linecutter Participating Member Offline Posts: 35 Location: Ruin, VA Joined: Nov 28^th, 2007	Re: Walker-Hepburn Reply #13 - Apr 22^nd, 2015 at 1:22pm	Print Post
	Beautiful! Look forward to seeing the finished product. Thanks for showing this. Ken


	Facebook IP Logged

bnice Frequent Elocutionist Offline Posts: 1856 Location: Iowa Joined: Nov 30^th, 2006	Re: Walker-Hepburn Reply #14 - Apr 22^nd, 2015 at 1:46pm	Print Post
	Wooow! Thanks for posting this. Look forward to seeing the finished rifle.


	IP Logged

Page Index Toggle

Pages: [1] 2

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.2597 seconds.