ASSRA Forum - 297/250 rook reamer needed, rent, buy, etc

ASSRA Forum › General › Gunsmithing Single Shot Rifles › 297/250 rook reamer needed, rent, buy, etc

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

297/250 rook reamer needed, rent, buy, etc (Read 2460 times)

corerftech Senior Forum Member Offline Posts: 259 Location: Memphis, TN Joined: Mar 3^rd, 2014	297/250 rook reamer needed, rent, buy, etc Apr 18^th, 2015 at 7:36pm	Print Post
	Will be converting a 25RF Stev 44 to 297/250 rook. Need a reamer? Anyone have any options aside from calling Dave Kiff? Friends, family?? Anyone?? Mike


	IP Logged

MI-shooter Moderator Offline Posts: 698 Location: SE Michigan Joined: Apr 18^th, 2004	Re: 297/250 rook reamer needed, rent, buy, etc Reply #1 - Apr 19^th, 2015 at 10:10pm	Print Post
	Contact Steve Durren at Johnsons Sporting Goods. He has a Pacific Tool reamer. 517-265-2545


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 16146 Location: Oregon Joined: Feb 2^nd, 2009	Re: 297/250 rook reamer needed, rent, buy, etc Reply #2 - Apr 20^th, 2015 at 2:52pm	Print Post
	I'm curious about your plan, simply because I have a Ballard in .25 Stevens, and also dies, brass, etc. for the .297-250 Rook. In comparing the .297-250 to the .25 Stevens I don't see the .297-250 reamer cleaning up the chamber, so wondered if your plan is to just hope it's close enough, and allow the jump from case to bore? And then there's the bullet issue. Do you have a mold or supplier for the correct size and weight bullets for the .297-250? With the Morris being a .235" bullet, and the Stevens a .251", what's the bullet plan, and what will you do for dies? Ream out a .297-250 die or? Hope your plan works, as I'd love to rechamber my Ballard if it does!

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

MI-shooter Moderator Offline Posts: 698 Location: SE Michigan Joined: Apr 18^th, 2004	Re: 297/250 rook reamer needed, rent, buy, etc Reply #3 - Apr 20^th, 2015 at 9:13pm	Print Post
	The 297/250 bullet is a .251 diameter. 25 ACP bullets work well and they come in 35gr JHP, 50gr FMJ and molds were made by Lyman. If you need to reline, TJ's makes a 297/250 .251 bore liner.


	IP Logged

25cal Participating Member Offline Posts: 43 Joined: Nov 27^th, 2009	Re: 297/250 rook reamer needed, rent, buy, etc Reply #4 - Apr 20^th, 2015 at 9:53pm	Print Post
	When you cut the chamber for the 297/250, consider running the reamer in far enough to use the 22 Hornet brass rim thickness, not the original case rim thickness. Makes forming cases much easier than thinning tiny case rims.


	IP Logged

tim_s Oldtimer Offline Posts: 816 Location: 13066 Joined: Oct 11^th, 2006	Re: 297/250 rook reamer needed, rent, buy, etc Reply #5 - Apr 20^th, 2015 at 10:50pm	Print Post
	Hunters Supply sells two versions of cast .251 slugs, the flat nose is reasonably accurate lthough at 50gr. A bit light.

	“ I don’t have to be faster than the bear, I just have to be faster than you”
	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.0194 seconds.