ASSRA Forum › General › Gunsmithing Single Shot Rifles › Win 1885 hammer interchangeablity
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Win 1885 hammer interchangeablity (Read 1228 times)
jt
Newbie
*
Offline



Posts: 6
Location: Baltimore
Joined: Sep 30th, 2013
Win 1885 hammer interchangeablity
Apr 2nd, 2015 at 2:43pm
Print Post  
I realize that there are specific hammers for leaf spring and coil spring actions and according to Campbells book there are @ 9  variations for the SS totally.  I was wondering if the hammers for high and low wall actions were interchangeable within the coil spring actions ?   Thanks
  
Back to top
 
IP Logged
 
Old-Win
Frequent Elocutionist
*****
Offline



Posts: 1676
Location: Minnesota
Joined: Nov 24th, 2005
Re: Win 1885 hammer interchangeablity
Reply #1 - Apr 2nd, 2015 at 5:10pm
Print Post  
The face on the high wall hammer is a little taller than the low wall so it may look funny in a low wall rifle. On the other hand, the low wall hammer looks OK in a high wall.  Otherwise, I think they should interchange.  Bob
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.5016 seconds.