ASSRA Forum - Treatise on Pistol Powder Usage

ASSRA Forum › General › Reloading the Single Shot Rifle › Treatise on Pistol Powder Usage

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1 2 [3]

Very Hot Topic (More than 25 Replies)

Treatise on Pistol Powder Usage (Read 22698 times)

RoyB Oldtimer Offline Posts: 838 Location: Dartmouth, MA Joined: Mar 28^th, 2011	Re: Treatise on Pistol Powder Usage Reply #30 - Mar 27^th, 2015 at 11:39am	Print Post
	The only problem now is FINDING Unique! I've not seen it on shelves for a year!

	Roy B Dartmouth, MA (You need to *Login* or *Register* to view media files and links)
	WWW IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 17968 Location: Oregon Joined: Feb 2^nd, 2009	Re: Treatise on Pistol Powder Usage Reply #31 - Mar 27^th, 2015 at 3:14pm	Print Post
	Fillers scare me ever since I read about ringing chambers with some dense type fillers. I've never used fillers anyway, but since it seems my good results without fillers and Unique are still questionable, I better just keep my mouth shut now. I obviously am mistaken about liking Unique without fillers.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

boats Frequent Elocutionist Offline Posts: 7726 Location: Virginia Joined: Apr 23^rd, 2004	Re: Treatise on Pistol Powder Usage Reply #32 - Mar 27^th, 2015 at 5:00pm	Print Post
	On measuring Unique. Adjustable measures don't throw it well even a Harrell's. Get one of the little Bonanza fixed rotor pistol measures. They throw it near perfect. Don't think they make them anymore but you see them on EBay No doubt other brands same design work as well. Boats


	IP Logged

Cat_Whisperer Frequent Elocutionist Offline No 1, 9.3x74R Posts: 3983 Location: Mountains of Virginia Joined: Apr 17^th, 2004	Re: Treatise on Pistol Powder Usage Reply #33 - Mar 27^th, 2015 at 5:29pm	Print Post
	RoyB wrote on Mar 27^th, 2015 at 11:39am: The only problem now is FINDING Unique! I've not seen it on shelves for a year! yup. Saw two pounds last month here. $30 a pound.

	Cat Whisperer (trk) Chief of Smoke Pulaski Coehorn Works and Skunk Works Drafted May 1970, Retired Maj. U.S.Army assra #9885
	WWW IP Logged

boats Frequent Elocutionist Offline Posts: 7726 Location: Virginia Joined: Apr 23^rd, 2004	Re: Treatise on Pistol Powder Usage Reply #34 - Mar 27^th, 2015 at 9:34pm	Print Post
	It's starting to show up, I bought a 8 lb jug two weeks ago. Good thing, my 4 lb paper can marked 1997 was about empty. I did use up a quite a few 1 pounders of the "new" Unique between the two. Interesting going back to the old after switching to the new formula that was supposed to be so much better. No difference none at all. Now to open up that 8 pounder Boats


	IP Logged

JS47 Frequent Elocutionist Offline Posts: 1265 Location: Arizona Joined: Oct 12^th, 2012	Re: Treatise on Pistol Powder Usage Reply #35 - Mar 27^th, 2015 at 10:56pm	Print Post
	One of the few sensible things I've done in recent years was to buy two 8 pounders of Unique before the Presidential Difficulties arose. I figured that I can make any gun I have run with Unique well enough to get by. The only problem I've had with it is that I sometimes get leading when using wheel weight bullets. JS


	IP Logged

Adrian Full Member Offline Posts: 122 Joined: Mar 2^nd, 2015	Re: Treatise on Pistol Powder Usage Reply #36 - Mar 28^th, 2015 at 5:57pm	Print Post
	JS47 wrote on Mar 27^th, 2015 at 10:56pm: One of the few sensible things I've done in recent years was to buy two 8 pounders of Unique before the Presidential Difficulties arose. I figured that I can make any gun I have run with Unique well enough to get by. The only problem I've had with it is that I sometimes get leading when using wheel weight bullets. JS Add a bit of tin and antimony and size them bigger?


	IP Logged

JS47 Frequent Elocutionist Offline Posts: 1265 Location: Arizona Joined: Oct 12^th, 2012	Re: Treatise on Pistol Powder Usage Reply #37 - Mar 28^th, 2015 at 10:36pm	Print Post
	Tin and antimony are expensive and hard to come by so I just put up with the minor leading. For higher velocity or extended target shooting I go to a different powder or alloy, or use a paper patch bullet. JS


	IP Logged

.22-5-40 Oldtimer Offline Posts: 826 Joined: Feb 13^th, 2010	Re: Treatise on Pistol Powder Usage Reply #38 - Mar 29^th, 2015 at 3:49pm	Print Post
	Today, I came across a letter from Hodgdon a few years ago...They advised not using TrailBoss in the big nitro express cases...even though they were annealed because of the greater thickness of the brass... the pressure is not there to obturate case walls against chamber & the result is high back thrust against breech. Wouldn't this also be true of any fast burning pistol/shotgun powders such as Unique? Is this a valid concern? Thanks!


	IP Logged

Adrian Full Member Offline Posts: 122 Joined: Mar 2^nd, 2015	Re: Treatise on Pistol Powder Usage Reply #39 - Mar 29^th, 2015 at 7:57pm	Print Post
	.22-5-40 wrote on Mar 29^th, 2015 at 3:49pm: Is this a valid concern? Thanks! I would say yes, valid. From perspective of my limited experience i can say that annealing case necks and mouths and sizing cases minimally (neck only) would solve most of this issue. I have annealed cases that shoot very cleanly, no soot is found on the necks.I have fired cases before annealing and they did show signs of soot on the necks. The largest case i ever loaded with Unique is the 45-70. Your 3 1/3" is quite a bit larger. That is a strong rifle you have, after all. I would anneal cases and i would develop a load carefully. I have tried Red Dot in the 30-06 and the .338 Federal and they did show soot on necks. After annealing, cases stayed clean. 12 grains of Red Dot in the 30-06 is an awfully small charge in a long case. Still, rifle shot just fine and accurately.
	« Last Edit: Mar 29^th, 2015 at 8:03pm by Adrian »

	IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 12278 Location: Why, out West of course Joined: May 29^th, 2006	Re: Treatise on Pistol Powder Usage Reply #40 - Mar 30^th, 2015 at 1:22am	Print Post
	.22-5-40 wrote on Mar 29^th, 2015 at 3:49pm: Today, I came across a letter from Hodgdon a few years ago...They advised not using TrailBoss in the big nitro express cases...even though they were annealed because of the greater thickness of the brass... the pressure is not there to obturate case walls against chamber & the result is high back thrust against breech. Wouldn't this also be true of any fast burning pistol/shotgun powders such as Unique? Is this a valid concern? Thanks! No. Joe.

	A blind squirrel runs into a tree every once in a while.
	IP Logged

.22-5-40 Oldtimer Offline Posts: 826 Joined: Feb 13^th, 2010	Re: Treatise on Pistol Powder Usage Reply #41 - Mar 30^th, 2015 at 6:25pm	Print Post
	Westerner..could you please elaborate as to why the faster pistol powders such as Unique would not be a concern? Thanks!...These Hornady .450.400 3 1/4" cases look to have been factory annealed down to shoulder.


	IP Logged

.22-5-40 Oldtimer Offline Posts: 826 Joined: Feb 13^th, 2010	Re: Treatise on Pistol Powder Usage Reply #42 - May 5^th, 2015 at 7:06pm	Print Post
	I spoke to a technical advisor at Alliant today. Ever since they went to the Piezo Electric pressure testing..all recommendations for reduced riflke loads using Unique were dropped. What about all the low pressure loads for the .45-70 & .45-90 using this powder and cast in the older Lyman reload books? This doesn't cancel out these older safe loads? What are your thoughts? Thanks!


	IP Logged

Page Index Toggle

Pages: 1 2 [3]

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.8591 seconds.