ASSRA Forum - CPA rifle wait time ?

ASSRA Forum › General › General Discussion › CPA rifle wait time ?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Hot Topic (More than 10 Replies)

CPA rifle wait time ? (Read 5609 times)

Brudford01 Full Member Offline Posts: 196 Location: Beaver Falls PA Joined: May 18^th, 2008	CPA rifle wait time ? Mar 13^th, 2015 at 2:04pm	Print Post
	I ordered a CPA bench rifle in 32-40 with a bench forearm and a sporter stock , all unfinished wood. I will be doing that myself . What was the typical wait time for the completion of your rifle ?


	IP Logged

harry_eales Ex Member	Re: CPA rifle wait time ? Reply #1 - Mar 13^th, 2015 at 3:40pm	Print Post
	brudford, The very best people to ask are the makers, they know exactly how many rifles in front of your order there are to be made, so they will probably be accurate to around about a month. Asking anyone else will just give you false information, basically it all depends on how busy they are, I remember a time when Shiloh Sharps would get a new rifle to you in under a year. Then the Film "Quigley down under" came out and the delivery date shot up to four or five years. There's simply no telling. Harry


	IP Logged

John Boy Ex Member	Re: CPA rifle wait time ? Reply #2 - Mar 13^th, 2015 at 4:42pm	Print Post
	Quote: The very best people to ask are the makers, they know exactly how many rifles in front of your order there are to be made, so they will probably be accurate to around about a month. Paul or Gail will answer the phone or respond ... Phone: 1 (570) 828-1669 Fax: 1 (570) 828-8333 Email: info@cparifles.com Gail's direct email ... gail@cparifles.com


	IP Logged

watchthewind Frequent Elocutionist Offline Posts: 1107 Location: Phoenix, AZ Joined: Mar 10^th, 2015	Re: CPA rifle wait time ? Reply #3 - Mar 13^th, 2015 at 5:47pm	Print Post
	I was recently told about 5 months.

	ASSRA Member # 11408
	IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1672 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: CPA rifle wait time ? Reply #4 - Mar 13^th, 2015 at 6:23pm	Print Post
	watchthewind wrote on Mar 13^th, 2015 at 5:47pm: I was recently told about 5 months. Yup, give or take and well worth the wait. I have a similar bench model on order since January. I just received the barrel from RKS. I spoke to Paul about dropping it off. He said no rush, they'll let me know when there ready for it. Bob

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

SSShooter Frequent Elocutionist Offline Posts: 2942 Location: Southern NJ Joined: Aug 1^st, 2010	Re: CPA rifle wait time ? Reply #5 - Mar 13^th, 2015 at 6:57pm	Print Post
	rkaires wrote on Mar 13^th, 2015 at 6:23pm: I just received the barrel from RKS. Bob How long was the delivery on your RKS barrel?

	Glenn - Stevens 044 1/2, Bartlein SS 5R barrel in 22LR
	GTalk IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1672 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: CPA rifle wait time ? Reply #6 - Mar 13^th, 2015 at 8:25pm	Print Post
	SSShooter wrote on Mar 13^th, 2015 at 6:57pm: rkaires wrote on Mar 13^th, 2015 at 6:23pm: I just received the barrel from RKS. Bob How long was the delivery on your RKS barrel? Glenn, I ordered it early September. Bob

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

SSShooter Frequent Elocutionist Offline Posts: 2942 Location: Southern NJ Joined: Aug 1^st, 2010	Re: CPA rifle wait time ? Reply #7 - Mar 13^th, 2015 at 8:53pm	Print Post
	That's not bad at all. 44cal gain-twist...................... Hmmmm. Bob - what does Ron get for a barrel? Good exchange rate at the moment.

	Glenn - Stevens 044 1/2, Bartlein SS 5R barrel in 22LR
	GTalk IP Logged

Pentz Senior Forum Member Offline Funf und Zwanzig mit den Hut Posts: 435 Location: Vancouver, WA Joined: Sep 4^th, 2014	Re: CPA rifle wait time ? Reply #8 - Mar 13^th, 2015 at 11:19pm	Print Post
	Good timing to ask; I picked up my 32-20 today, ordered it September 5. Will post pics after I get all of the drool wiped off of it.

	ASSRA Member Yoostabe # 11497
	IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1672 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: CPA rifle wait time ? Reply #9 - Mar 14^th, 2015 at 7:30am	Print Post
	SSShooter wrote on Mar 13^th, 2015 at 8:53pm: That's not bad at all. 44cal gain-twist...................... Hmmmm. Bob - what does Ron get for a barrel? Good exchange rate at the moment. Glen, They are a little more than a standard twist Bartlein or Krieger. Shipping was $70.00 to New york. My 6 groove SS barrel was $405.00 shipped. I have a 8 groove on order in CM for my Mod 52. That was $450.00 shipped. I may switch my 8 groove to SS as well. CPA offers a durable Teflon coating for stainless barrels that looks like a blued barrel. I like the traditional look. Bob

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1672 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: CPA rifle wait time ? Reply #10 - Mar 14^th, 2015 at 7:34am	Print Post
	Pentz wrote on Mar 13^th, 2015 at 11:19pm: Good timing to ask; I picked up my 32-20 today, ordered it September 5. Will post pics after I get all of the drool wiped off of it. I know the feeling. My wife was worried when I brought my first CPA home. Seems I was spending a lot of time with it. Bob

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

Brudford01 Full Member Offline Posts: 196 Location: Beaver Falls PA Joined: May 18^th, 2008	Re: CPA rifle wait time ? Reply #11 - Mar 14^th, 2015 at 8:01am	Print Post
	I ordered my CPA back in Dec. 2014 . Gail told me about four months if I got an unfinished stock which I did . I have not E-mailed or called them, I figured they have enough to do rather than respond to calls like when will my rifle be done ! I'am able and willing to wait . Maybe around the end of May I will have the rifle and another two weeks until I sand and finish the stock . Thanks


	IP Logged

SSShooter Frequent Elocutionist Offline Posts: 2942 Location: Southern NJ Joined: Aug 1^st, 2010	Re: CPA rifle wait time ? Reply #12 - Mar 14^th, 2015 at 10:40am	Print Post
	rkaires wrote on Mar 14^th, 2015 at 7:30am: SSShooter wrote on Mar 13^th, 2015 at 8:53pm: That's not bad at all. 44cal gain-twist...................... Hmmmm. Bob - what does Ron get for a barrel? Good exchange rate at the moment. Glen, They are a little more than a standard twist Bartlein or Krieger. Shipping was $70.00 to New york. My 6 groove SS barrel was $405.00 shipped. I have a 8 groove on order in CM for my Mod 52. That was $450.00 shipped. I may switch my 8 groove to SS as well. CPA offers a durable Teflon coating for stainless barrels that looks like a blued barrel. I like the traditional look. Bob Thanks for the info. Want to build a long-range rifle in 40 or 44cal and am thinking the quality of the barrel starts to become critical when one gets past, say 600yd. Was thinking of one of the new GM lapped & polished barrels, but they will not provide a projected delivery date on their new barrels. Too busy running their big orders, I guess.

	Glenn - Stevens 044 1/2, Bartlein SS 5R barrel in 22LR
	GTalk IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.6892 seconds.