ASSRA Forum - Ideal #1 Powder flask--spring replacement?

ASSRA Forum › General › General Discussion › Ideal #1 Powder flask--spring replacement?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Ideal #1 Powder flask--spring replacement? (Read 1980 times)

John in PA Oldtimer Offline Posts: 590 Location: Hollidaysburg, PA Joined: Nov 3^rd, 2009	Ideal #1 Powder flask--spring replacement? Mar 13^th, 2015 at 7:50pm	Print Post
	I have one of these in excellent condition, (You need to *Login* or *Register* to view media files and links) but lacking the spring that causes the measure to return to center when moving it left or right. Could someone post a picture of one showing the intact spring so I can duplicate it? (or suggest someone who can do the repair) Thanks!

	John Wells Hollidaysburg, PA Peabody and Peabody-Martini's Wanted!
	IP Logged

Tom_Trevor assra life no.71 Oldtimer Offline Tom Trevor Posts: 712 Location: Granada Hills Ca. Joined: Jun 16^th, 2004	Re: Ideal #1 Powder flask--spring replacement? Reply #1 - Mar 13^th, 2015 at 9:05pm	Print Post
	Here you are John. Does not look like a problem to make up. Just set it on a Pope flask for the picture hope Harry does not get mad.


	IP Logged

John in PA Oldtimer Offline Posts: 590 Location: Hollidaysburg, PA Joined: Nov 3^rd, 2009	Re: Ideal #1 Powder flask--spring replacement? Reply #2 - Mar 14^th, 2015 at 1:25pm	Print Post
	Thanks a million, Tom. I have the original spring, but one arm apparently broke off short, failing to engage the stop on the measuring chamber/powder cut-off. Shouldn't be too hard to repair.

	John Wells Hollidaysburg, PA Peabody and Peabody-Martini's Wanted!
	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.4211 seconds.