ASSRA Forum › General › Reloading the Single Shot Rifle › 32 miller & 4227
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) 32 miller & 4227 (Read 10436 times)
oneatatime
Frequent Elocutionist
*****
Offline



Posts: 4534
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: 32 miller & 4227
Reply #15 - Aug 18th, 2015 at 5:39pm
Print Post  
Wait, I see it now. The drawing is not to scale and what I assumed was a neck is really freebore and the forward case length is 1.411 plus the .059 rim is 1.470. Sorry.
  
Back to top
 
IP Logged
 
rkaires
Frequent Elocutionist
*****
Offline


No Stronger Bond

Posts: 1674
Location: Dingmans Ferry, PA
Joined: Oct 26th, 2012
Re: 32 miller & 4227
Reply #16 - Aug 18th, 2015 at 6:48pm
Print Post  
That's it  Wink


Bob
  
ASSRA #11031
NRA Life
Proud Noodlehead

"Peace is that brief, glorious moment in history, when everybody stands
around reloading."~ ~ Thomas Jefferson
Back to top
 
IP Logged
 
rkaires
Frequent Elocutionist
*****
Offline


No Stronger Bond

Posts: 1674
Location: Dingmans Ferry, PA
Joined: Oct 26th, 2012
Re: 32 miller & 4227
Reply #17 - Aug 18th, 2015 at 6:56pm
Print Post  
jseines wrote on Aug 18th, 2015 at 3:40pm:
I now own this rifle...I suspect sometime after the 32Dell was stamped on the barrel a new reamer was introduced to the chamber...It appears to me it's now chambered in 32RKS...the brass that came with the rifle was 357 Maximum with a case length of 1.570...the action is a custom Meacham Hoch with a RKS gain-twist barrel...I'm now looking for 32RKS load data...Cheers/John


(You need to Login or Register to view media files and links)
  
ASSRA #11031
NRA Life
Proud Noodlehead

"Peace is that brief, glorious moment in history, when everybody stands
around reloading."~ ~ Thomas Jefferson
Back to top
 
IP Logged
 
jseines
Junior Member
**
Offline



Posts: 54
Joined: Mar 17th, 2011
Re: 32 miller & 4227
Reply #18 - Aug 21st, 2015 at 7:10pm
Print Post  
Does anyone have the spec's on the 32 Miller "Long"...also was there a 32 Dell "Long"...again my barrel is stamped 32Dell...my fire-formed brass measures 1.570"...I suspect the chamber may have been introduced to a reamer sometime after the original chamber was cut...? Thanks/John
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.0896 seconds.