ASSRA Forum › General › Reloading the Single Shot Rifle › 9.3 MM bullet mold source
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic 9.3 MM bullet mold source (Read 4096 times)
singleshotsam
Oldtimer
*****
Offline



Posts: 594
Location: Silver City NM
Joined: Jan 15th, 2009
9.3 MM bullet mold source
Dec 12th, 2014 at 5:27pm
Print Post  
  I am in need of a 9.3 MM cast bullet for a Model 33 Husqvarna roller in 360 BPE. The original bullet was in the 250 grain range and the bore slugs at .365-.366 and that is what I would like to stay with. I have searched the internet and as yet have not come up with a suitable mold. I know I can have a custom mold made, but at this time I think the condition of the bore is a little suspect. It has some pitting but strong rifling and I hate to purchase a custom mold just to shoot the rifle and find it needs a liner or new barrel. Any suggestions or sources will be greatly appreciated.

SSS
  
Back to top
 
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2942
Location: Southern NJ
Joined: Aug 1st, 2010
Re: 9.3 MM bullet mold source
Reply #1 - Dec 12th, 2014 at 5:56pm
Print Post  
The place listed here has a bunch of used molds. He might have one that fits your needs.
(You need to Login or Register to view media files and links)

Also, keep an eye on eBay. Lots of molds sold there, as well.
  
Glenn - Stevens 044 1/2, Bartlein SS 5R barrel in 22LR
Back to top
GTalk  
IP Logged
 
yamoon
Oldtimer
*****
Offline


NRA Life, ASSRA , GGCA,
MCA

Posts: 999
Location: Junction City Kansas
Joined: Feb 11th, 2012
Re: 9.3 MM bullet mold source
Reply #2 - Dec 12th, 2014 at 6:25pm
Print Post  
I have a 9.3 x 53 swiss, it slugs .363. I ordered a mold from NEI. It arrived last week. I will be casting some bullets with it after deer season. I am hoping it will cast .364-.365.
Mike
  
Back to top
 
IP Logged
 
QuestionableMaynard8130
Frequent Elocutionist
*****
Offline



Posts: 4144
Location: Benton  Harbor MI
Joined: Apr 17th, 2004
Re: 9.3 MM bullet mold source
Reply #3 - Dec 12th, 2014 at 8:31pm
Print Post  
check   Accuratemolds.com   website
  
sacred cows make the best burger
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Offline



Posts: 4415
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: 9.3 MM bullet mold source
Reply #4 - Dec 13th, 2014 at 12:45am
Print Post  
Yes, Accurate molds - this is the one I use in my Husqvarna:
(You need to Login or Register to view media files and links)
200 grains is the correct weight for the 9.3x57R (360). 250 grains is for the 9.3x72R.
  
Back to top
 
IP Logged
 
stevens52
Full Member
***
Offline



Posts: 234
Location: Fairview,NC
Joined: Jun 6th, 2004
Re: 9.3 MM bullet mold source
Reply #5 - Dec 13th, 2014 at 11:19pm
Print Post  
There are 2 on gunbroker, #457950750 and #457116424
I am not connected in any way to the sale, just happened to remember this post.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.4823 seconds.