Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) Re: Bullet mold maker? (Read 16340 times)
Boone
Ex Member


Re: Bullet mold maker?
Reply #15 - Oct 11th, 2014 at 10:14pm
Print Post  
   Clever Joe, you are right, Boone is a female and Ed's eldest daughter Kathleen. I don't usually use my given name on message boards and the "Boone" comes from a story where I got myself lost in the woods, on a blacker than hell night, with a broken flashlight in the middle of a nettle patch (second only to the story when I decided to go canoeing in the middle of a winter's snow). 
   I have played with the idea of writing a book but get lost in the dilemma of whether to approach the story of his gunsmithing from a technical point (influences/techniques) and humanizing it with antidotes. I have started trying to write and talk to people and compile information. The gunshow was held for dad, put on by a friend/apprentice, in part to give me an opportunity to track and photograph some of the rifles he made. There were several out of state people that attended and I really wish dad could have seen it.
« Last Edit: Oct 11th, 2014 at 10:23pm by »  
Back to top
 
IP Logged
 
rfd
Full Member
***
Offline



Posts: 146
Joined: Aug 20th, 2014
Re: Bullet mold maker?
Reply #16 - Oct 12th, 2014 at 8:18am
Print Post  
and a very good book it would be.  

if you author it, if they print it, it will be read and housed in the cathedral bookcases of we firearms disciples.

but more importantly, its full story needs to be told, and equally both about the man and his work.



  

NRA Life Member ~ NRA RSO ~ (You need to Login or Register to view media files and links)
Back to top
WWW  
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 12269
Location: Why, out West of course
Joined: May 29th, 2006
Re: Bullet mold maker?
Reply #17 - Oct 13th, 2014 at 12:51am
Print Post  
Boone, please check your PM's (personal messages). 

     Joe.
  

A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
Boone
Ex Member


Re: Bullet mold maker?
Reply #18 - Oct 13th, 2014 at 6:27pm
Print Post  
Thanks for all the wonderful comments. I wish dad was around to see it. A few of dad's contemporaries are better known and always encouraged dad to charge more for his rifles and his restoration work. Dad always bulked and said he didn't want to make a wall hanger for a rich man so he charged a price where the common man could afford to buy/shoot them. I think he would be really pleased to see all the comments posted here. Thanks again.
  
Back to top
 
IP Logged
 
KAF
Ex Member


Re: Bullet mold maker?
Reply #19 - Oct 14th, 2014 at 7:49am
Print Post  
Ed would have had to see the comments on paper printed out.
Him on a computer would have been something to see.  He seemed to hate computers and technology with a passion.

  
Back to top
 
IP Logged
 
Boone
Ex Member


Re: Bullet mold maker?
Reply #20 - Oct 14th, 2014 at 9:40pm
Print Post  
   Indeed! Dad detested computers and the only time he ever looked at one was over my shoulder. Alright Keith, I admit to being curious as to who you are. I keep trying to think of possible names and I am stymied. Please message me and tell me who you are and how you knew my father. Obviously you were at his shop prior to the fire and you are familiar with the old cartridge rifles he collected. Did you shoot with him at Liberty Conservation?
« Last Edit: Oct 14th, 2014 at 10:20pm by »  
Back to top
 
IP Logged
 
harry_eales
Ex Member


Re: Bullet mold maker?
Reply #21 - Oct 15th, 2014 at 7:46am
Print Post  
Boone,

I believe that a book or perhaps biography of a person is best written by those who knew him  i.e. His family, close friends and fellow artisans, and written soon after the subject has departed this life. That way memories of him are still fresh in their minds. Far to many biographies are written many years later after the freshness of cherished memories have faded and when many that knew him have also passed to whatever lies beyond.

At least consider writing to everyone you know who knew him asking how they came to meet him, there must be a plethora of facts, anecdotes, and tales about him out there, its a case of assembling all of the information in some sort of order. I know some biographies can be as dry to read as blackboard chalk is to chew, but the telling of actual stories of happenings can enliven such a tome, and bring a persons life and work into a reality that will last for centuries. He would never be forgotten as long as a single copy of the biography exists. Future generations of your family yet unborn will be able to learn about him, his work and humour. Illustrated by perhaps some pictures of him, his workshop and what he produced.

You have an opportunity here, which is seldom grasped until it is far too late, and putting it off simply reduces the opportunity of obtaining fresh information about your father. He will be remembered by those that knew him but eventually no one will remember him except by family tales and like all messages passed by mouth they drift away from the original truths the further into the future people live. But a document can last centuries.

I can remember members of my own family that were born in the last half of the 1800's but when I'm gone all memory of those people will be gone.

Please do try to gather what information and pictures you can. Even if you don't publish, it will still be a legacy for your family to pass on to future generations.

Very respectfully,

Harry
  
Back to top
 
IP Logged
 
Boone
Ex Member


Re: Bullet mold maker?
Reply #22 - Dec 2nd, 2014 at 8:58pm
Print Post  
     Harry, thank you for the nice words and sentiment. I truly hate the thought of dad fading away into obscurity and would like to record some of his history--even if it is only for my sons.
     Western, thank you as well. Due to your post on the American Long Rifles site, I will soon be the owner of one more rifle. Smiley
  
Back to top
 
IP Logged
 
UtahDave
Senior Forum Member
****
Offline



Posts: 395
Location: Heber City, Utah
Joined: Aug 14th, 2010
Re: Bullet mold maker?
Reply #23 - Dec 2nd, 2014 at 10:07pm
Print Post  
All,

How about an article in the journal as a first step?  There is nearly enough info in this wonderful thread to produce a nice piece.   

Dave
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint