ASSRA Forum › General › Reloading the Single Shot Rifle › Lube: Pan or Pump?
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) Lube: Pan or Pump? (Read 8572 times)
Cat_Whisperer
Frequent Elocutionist
*****
Offline


No 1, 9.3x74R

Posts: 3878
Location: Mountains of Virginia
Joined: Apr 17th, 2004
Re: Lube: Pan or Pump?
Reply #15 - Feb 13th, 2014 at 2:25pm
Print Post  
more
  
Cat Whisperer (trk)
Chief of Smoke
Pulaski Coehorn Works and Skunk Works
Drafted May 1970, Retired Maj. U.S.Army
assra #9885
Back to top
WWW  
IP Logged
 
Cat_Whisperer
Frequent Elocutionist
*****
Offline


No 1, 9.3x74R

Posts: 3878
Location: Mountains of Virginia
Joined: Apr 17th, 2004
Re: Lube: Pan or Pump?
Reply #16 - Feb 13th, 2014 at 2:26pm
Print Post  
in process storage, some waiting some done.
  
Cat Whisperer (trk)
Chief of Smoke
Pulaski Coehorn Works and Skunk Works
Drafted May 1970, Retired Maj. U.S.Army
assra #9885
Back to top
WWW  
IP Logged
 
Cat_Whisperer
Frequent Elocutionist
*****
Offline


No 1, 9.3x74R

Posts: 3878
Location: Mountains of Virginia
Joined: Apr 17th, 2004
Re: Lube: Pan or Pump?
Reply #17 - Feb 13th, 2014 at 2:28pm
Print Post  
Lee push thru sizer.
I modify them as needed to the right diameter.

Bases come out right-much clean, not perfect.
  
Cat Whisperer (trk)
Chief of Smoke
Pulaski Coehorn Works and Skunk Works
Drafted May 1970, Retired Maj. U.S.Army
assra #9885
Back to top
WWW  
IP Logged
 
Cat_Whisperer
Frequent Elocutionist
*****
Offline


No 1, 9.3x74R

Posts: 3878
Location: Mountains of Virginia
Joined: Apr 17th, 2004
Re: Lube: Pan or Pump?
Reply #18 - Feb 13th, 2014 at 2:29pm
Print Post  
.375 Lyman and .375 Saeco

Residual lube on tray.  Warm it up and it wipes off with paper towel.
  
Cat Whisperer (trk)
Chief of Smoke
Pulaski Coehorn Works and Skunk Works
Drafted May 1970, Retired Maj. U.S.Army
assra #9885
Back to top
WWW  
IP Logged
 
boats
Frequent Elocutionist
*****
Offline



Posts: 7551
Location: Virginia
Joined: Apr 23rd, 2004
Re: Lube: Pan or Pump?
Reply #19 - Feb 13th, 2014 at 4:51pm
Print Post  
Pan lube tapered, have a pump cause I like it, rarely use it.

Straight bullets for fixed use a Lyman sizer with die that just kisses the bullet, no measurable size just lube. It won't work well on Tapered.

Boats
  
Back to top
 
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2917
Location: Southern NJ
Joined: Aug 1st, 2010
Re: Lube: Pan or Pump?
Reply #20 - Feb 13th, 2014 at 4:57pm
Print Post  
Cat-Whisper - thank you.
  
Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
Back to top
GTalk  
IP Logged
 
Cat_Whisperer
Frequent Elocutionist
*****
Offline


No 1, 9.3x74R

Posts: 3878
Location: Mountains of Virginia
Joined: Apr 17th, 2004
Re: Lube: Pan or Pump?
Reply #21 - Feb 13th, 2014 at 6:02pm
Print Post  
boats wrote on Feb 13th, 2014 at 4:51pm:
Pan lube tapered, have a pump cause I like it, rarely use it.

Straight bullets for fixed use a Lyman sizer with die that just kisses the bullet, no measurable size just lube. It won't work well on Tapered.

Boats


I'd love to have the time to build an H&I die that would be larger at the top, tapered to match the nose of the bullet and have holes for lube in just the right places.
  
Cat Whisperer (trk)
Chief of Smoke
Pulaski Coehorn Works and Skunk Works
Drafted May 1970, Retired Maj. U.S.Army
assra #9885
Back to top
WWW  
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2917
Location: Southern NJ
Joined: Aug 1st, 2010
Re: Lube: Pan or Pump?
Reply #22 - Feb 16th, 2014 at 10:03am
Print Post  
With our weather have had "lots" of time to cast. After 1200 bullets have moved on to sizing and lubing. As mentioned above, am new to pan-lubing but have learned a couple of things to pass along. The biggest is that it is possible to put too many bullets in the pan. Reason being that the cake must have enough strength to not fracture when pushing bullets out. If it fractures, then the lube is pulled from the grooves of bullets along the fracture line. In my 8" diameter pan the limit is ~75 38cal bullets if keeping the outside bullets far enough from the edge of the cake to maintain the needed strength. The other problem is pushing the bullets out if too close together. The suggestion above of using a heavy leather glove in pushing out the bullets is a good one. After ~800 bullets lubed, am ready to move on to shooting (cabin fever). Wink
  
Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
Back to top
GTalk  
IP Logged
 
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2281
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Re: Lube: Pan or Pump?
Reply #23 - Feb 16th, 2014 at 11:30am
Print Post  
I'm a pan luber.  I own an RCBS lubrisizer, but I just use it to hang rags on Smiley.

I've tried dip lubing a couple of times but always found air bubbles trapped in the lube grooves.

Chris.
  
Back to top
 
IP Logged
 
hickstick_10
Participating Member
*
Offline



Posts: 42
Joined: Apr 9th, 2012
Re: Lube: Pan or Pump?
Reply #24 - Feb 17th, 2014 at 5:52pm
Print Post  
Also pan lube, started with the lyman (thought I needed it), tried pan lubing and got frustrated by the mess.

Then I read a trick on a forum that I should try sticking my tray of lube encased bullets in the fridge for awhile and push em out with my thumb.  Worked wonderful on the first try and haven't used the lyman since.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.5524 seconds.