ASSRA Forum › General › Collecting Single Shot Rifles › Tang sight hole spacing?
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Tang sight hole spacing? (Read 2184 times)
oneatatime
Frequent Elocutionist
*****
Offline



Posts: 3913
Location: Rocky Mountains
Joined: Oct 30th, 2011
Tang sight hole spacing?
Feb 10th, 2014 at 6:40pm
Print Post  
So which rifle(s) used a tang sight hole spacing of .5 inch?
  
Back to top
 
IP Logged
 
BP
Frequent Elocutionist
*****
Offline



Posts: 8039
Location: Westside
Joined: Aug 27th, 2006
Re: Tang sight hole spacing?
Reply #1 - Feb 10th, 2014 at 8:16pm
Print Post  
Doesn't show up on any of the charts I have.
Closest screw spacing I'm seeing is 11/16".
  
There are three kinds of men: The ones that learn by reading, the few who learn by observation, and the rest who have to pee on the electric fence and find out for themselves.
Proud Noodlehead
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Offline



Posts: 3913
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: Tang sight hole spacing?
Reply #2 - Feb 11th, 2014 at 2:08pm
Print Post  
Thanks for checking, BP. This is a nice modern sight with windage and center adjust and the hole spacing is exactly .5 and forward of the staff.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.2354 seconds.